Cassel Food Metal Detector | SQ/SQTA

Cassel - Food Metal Detector | SQ/SQTA

Supplier: OFI Weigh & Inspection

Food Metal Detector | SQ/SQTA

1/4

The Metal Detector SQ/SQTA is a sophisticated inspection system designed for high-precision metal detection across various industries.

Monitors bulk materials in the mining and building materials industry
Self-adjusting and extremely easy to install
High-quality components ensure reliability and long service life
Detects ferrous and non-ferrous metals, iron oxide and ore are ignored
Probe and amplifier are immune to vibration and resistant to weather, dirt and stone chips
Sturdy aluminium design: particularly robust and easy to clean

Features

High sensitivity (M6 nuts) at belt speed of 0.1 – 4 m/s
Very simple operation
Can be used near frequency converters, only 1 m minimum distance between probe and motors or magnets
Monitoring and display of internal para-meters
Optional: Realization as tandem for higher debris heights
Optional: complete blanking of magneti-te Fe304

Function

The SQ and SQTA metal detectors offer good metal sensitivity for monitoring bulk materials in the mining and construction industry.

They are extremely durable, insensitive to vibrations and resistant to weather, dirt or stone chips. They are easy to install, handle and maintain.

Both are available for belt widths from 500 mm to 1,200 mm. At a belt speed of 0.1 – 4.0 m/s they can easily detect metal parts of the size of about M6 nuts and larger.

For a higher belt speed (M10 nuts) at a belt speed of max. 4.0 m/s we recommend the metal detectors SQ and SQTA.

Specifications

SQ und SQTA
Input Signals
Sensor and coaxial cable
Output Signals
Metal alarm: 1 Siemens comb relay with 2 potential-free changeover contacts, Switching capacity 230V, 6A resistive load, quiescent or operating current principle switchable., Fault: 1 Siemens comb relay with 1 potential-free changeover contact, Switching capacity 230V, 6A resistive load.
Metal Detection
Iron, non-ferrous (e.g. aluminium or copper), largely ignores ores Optional: complete blanking of magnetite Fe304
Belt widths
500 – 2,000 mm
Belt speed
0.1 – 4 m/s (other speeds on request)
Protection Type
IP 55
Ambience
-20° C up to +55° C
Power Supply
230V 15 Hz +/- 15%, typ. consumption 15 VA
Controller
Sheet steel housing, prepared for wall mounting, 18 kg
Sensitivity
From steel nuts M6
Versions
SQ: mono for lower debris heights, SQTA: tandem for higher debris heights

Delivery Scope

Detection unit (sensor) SQ oder SQTA
Steuergerät, Gehäuse Stahlblech, vorbereitet für Wandmontage

Application

Machine protection against harmful metal parts such as tools or machine parts in the material

To contact OFI Weigh & Inspection about Cassel Food Metal Detector | SQ/SQTA use Get a quote.

Monitors bulk materials in the mining and building materials industry
Self-adjusting and extremely easy to install
High-quality components ensure reliability and long service life
Detects ferrous and non-ferrous metals, iron oxide and ore are ignored
Probe and amplifier are immune to vibration and resistant to weather, dirt and stone chips
Sturdy aluminium design: particularly robust and easy to clean

Features

High sensitivity (M6 nuts) at belt speed of 0.1 – 4 m/s
Very simple operation
Can be used near frequency converters, only 1 m minimum distance between probe and motors or magnets
Monitoring and display of internal para-meters
Optional: Realization as tandem for higher debris heights
Optional: complete blanking of magneti-te Fe304

Function

The SQ and SQTA metal detectors offer good metal sensitivity for monitoring bulk materials in the mining and construction industry.

They are extremely durable, insensitive to vibrations and resistant to weather, dirt or stone chips. They are easy to install, handle and maintain.

Both are available for belt widths from 500 mm to 1,200 mm. At a belt speed of 0.1 – 4.0 m/s they can easily detect metal parts of the size of about M6 nuts and larger.

For a higher belt speed (M10 nuts) at a belt speed of max. 4.0 m/s we recommend the metal detectors SQ and SQTA.

Specifications

SQ und SQTA
Input Signals
Sensor and coaxial cable
Output Signals
Metal alarm: 1 Siemens comb relay with 2 potential-free changeover contacts, Switching capacity 230V, 6A resistive load, quiescent or operating current principle switchable., Fault: 1 Siemens comb relay with 1 potential-free changeover contact, Switching capacity 230V, 6A resistive load.
Metal Detection
Iron, non-ferrous (e.g. aluminium or copper), largely ignores ores Optional: complete blanking of magnetite Fe304
Belt widths
500 – 2,000 mm
Belt speed
0.1 – 4 m/s (other speeds on request)
Protection Type
IP 55
Ambience
-20° C up to +55° C
Power Supply
230V 15 Hz +/- 15%, typ. consumption 15 VA
Controller
Sheet steel housing, prepared for wall mounting, 18 kg
Sensitivity
From steel nuts M6
Versions
SQ: mono for lower debris heights, SQTA: tandem for higher debris heights

Delivery Scope

Detection unit (sensor) SQ oder SQTA
Steuergerät, Gehäuse Stahlblech, vorbereitet für Wandmontage

Application

Machine protection against harmful metal parts such as tools or machine parts in the material

Read less...

To contact OFI Weigh & Inspection about Cassel Food Metal Detector | SQ/SQTA use Get a quote.

CASSEL-Metal-detector-SQTA-DS-EN-200510(0.28MB)

CASSEL-Metal-detector-SQTA-DS-US-200510(0.26MB)

AI Overview BETA

The Cassel SQ and SQTA are conveyor-belt metal detectors that monitor bulk materials for metal parts. They detect ferrous and non-ferrous metals while largely ignoring ores, helping protect machinery from harmful metal parts in conveyed material. Mining and building-materials operations can choose the SQ for lower debris heights or the SQTA for higher debris heights.

Detects steel nuts from M6 at belt speeds of 0.1–4 m/s
IP55 protection rating
Operating temperature: -20°C to +55°C
Probe and amplifier resist vibration, weather, dirt and stone chips
Internal parameters are monitored and displayed

Source: listing by OFI Weigh & Inspection on IndustrySearch · Updated 30 Oct 2026
Supplier document: CASSEL-Metal-detector-SQTA-DS-EN-200510 (PDF)

AI Overview is generated by artificial intelligence and may contain mistakes.

Let OFI Weigh & Inspection provide you with a quote

Supplier

Supplier: OFI Weigh & Inspection

Distribution: Australia & New Zealand

Location: Hoppers Crossing, VIC

Customers: Fonterra, Bega, Mondelez, IFF, Qantas, Toll, Amazon

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. OFI Weigh & Inspection are also proudly displaying these credentials:

Established:

2015

Employees:

6-20

Customers:

Fonterra, Bega, Mondelez, IFF, Qantas, Toll, Amazon

Memberships:

NMI, NATA, BRC

Distribution:

Australia & New Zealand

Location:

Hoppers Crossing , VIC