Lysaght Cladding - Klip-Lok 700 Hi-Strength ...
Lysaght - Cladding - Klip-Lok 700 Hi-Strength
LYSAGHT KLIP-LOK 700 HI-STRENGTH® is a wide-cover concealed fixed cladding offering long spans and excellent uplift performance.
If features a bold rib and flat pans with micro-cross fluting for superior strength, great for low pitched roofs. Also available on our mobile roll machine, onsite rollforming allows for long lengths previously unachievable due to transport limitations. * Fixing clips effectively secure sheets to supports without puncturing the sheet * No exposed fasteners means clean smooth lines and maximum water tightness * 700mm wide cover width * Suitable for installation over insulation up to 100mm thick * Clips are fixed with conventional hex head screws * Transverse fluting allows for longer spans * Now available with on-site mobile roll forming for even long uninterrupted and low roof pitch * Now available for large projects with on-site mobile roll forming with longer lengths avoiding expansion joints Note: * Minimum recommended roof pitch is 2 degrees (1 in 30) for 0.42mm BMT * Minimum recommended roof pitch is 1 degree (0.48 and 0.60mm BMT) * Please Note: LYSAGHT KLIP-LOK 700 HI-STRENGTH® is only available upon enquiry in some states.
To contact KFC Roofing Supplies about Lysaght Cladding - Klip-Lok 700 Hi-Strength use Get a quote.
If features a bold rib and flat pans with micro-cross fluting for superior strength, great for low pitched roofs. Also available on our mobile roll machine, onsite rollforming allows for long lengths previously unachievable due to transport limitations. * Fixing clips effectively secure sheets to supports without puncturing the sheet * No exposed fasteners means clean smooth lines and maximum water tightness * 700mm wide cover width * Suitable for installation over insulation up to 100mm thick * Clips are fixed with conventional hex head screws * Transverse fluting allows for longer spans * Now available with on-site mobile roll forming for even long uninterrupted and low roof pitch * Now available for large projects with on-site mobile roll forming with longer lengths avoiding expansion joints Note: * Minimum recommended roof pitch is 2 degrees (1 in 30) for 0.42mm BMT * Minimum recommended roof pitch is 1 degree (0.48 and 0.60mm BMT) * Please Note: LYSAGHT KLIP-LOK 700 HI-STRENGTH® is only available upon enquiry in some states.
To contact KFC Roofing Supplies about Lysaght Cladding - Klip-Lok 700 Hi-Strength use Get a quote.
Lysaght Klip-Lok 700 Hi-Strength is a concealed-fixed cladding system with long spans and uplift performance. Its fixing clips secure sheets to supports without piercing the sheets, leaving a smooth roof surface with no exposed fasteners. For large roof projects, on-site rollforming produces longer sheet lengths that avoid transport limits and the need for expansion joints.
- 700 mm cover width
- Suitable for installation over insulation up to 100 mm thick
- Minimum recommended pitch: 2 degrees for 0.42 mm BMT
- Micro-cross fluting adds strength to the bold ribs and flat pans
- Available by enquiry only in some states
Source: listing by KFC Roofing Supplies on IndustrySearch · Updated 2 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by KFC Roofing Supplies on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales