CMS 3-4 Interpolated Axes Machining Centers ...

CMS - 3-4 Interpolated Axes Machining Centers

Supplier: INNOVYNC

3-4 Interpolated Axes Machining Centers

1/5

Cms Speed | 3-4 interpolated axes machining center

Video for CMS 3-4 Interpolated Axes Machining Centers

In Stock

3-4 axes (on request) Numerically Controlled machining center for the processing of thin and thick flat glass sheets for both laminated and bullet-proof glass. It carries out any type of grinding, polishing, drilling, milling, cutting with disk, engraving, writing and 5° beveling operations.

Y-axis gantry system provides the crossbeam motion via two brushless motors synchronized by the NC, in order to ensure maximum accuracy and reduction in positioning errors that are due to mechanical elasticity
large-sized duralluminum work surface. The above ground height of 500 mm facilitates access to the machine and makes the glass sheet loading/unloading operations easier
ultra-thick and normalized electrowelded ribbed steel monolithic base ensures sturdiness and rigidity for heavy-duty operations and durability
the machine is adaptable to any need due, thanks to the high configurability of the tool rack
dynamic compensation of the polishing wheel for better machining quality
working water collection tank integrated with the base which reduces the machine’s footprint

Advantages

COMFORTABLE LOADING
Thanks to the automatic doors the machine can be loaded and downloaded automatic from an automatic charger, while ensuring the total occupational safety for the operator.

SOLID ALUMINUM WORKTOP
Duralumin worktop 18 mm thick, for greater stability and durability. The table allows being adjusted more than 10 times.

DOUBLE PRODUCTIVITY
In the Twin version, thanks to the independent double head, productivity increases by up to 51%. Speed Twin, the only machine with two heads and 4 axes on the market, allows simultaneous drilling on identical pieces.

LIMITLESS TOOLS RACK
The wide modularity of the tools rack allows to adapt the table to each need. The warehouses can be installed rear, side or also under the beam for a tool change in less than 10 seconds.

Advantages

COMFORTABLE LOADING
Thanks to the automatic doors the machine can be loaded and downloaded automatic from an automatic charger, while ensuring the total occupational safety for the operator.

SOLID ALUMINUM WORKTOP
Duralumin worktop 18 mm thick, for greater stability and durability. The table allows being adjusted more than 10 times.

Read less...

To contact INNOVYNC about CMS 3-4 Interpolated Axes Machining Centers use Get a quote.

CNC-Vetro_ENG(2.19MB)

AI Overview BETA

CMS Speed is a CNC machining centre for thin and thick flat glass, offering 3-4 interpolated axes on request and grinding, drilling, milling, cutting and polishing. Automatic doors let an automatic charger load and unload it, ensuring operator safety. Glass processors can place tool stores at the rear, side or under the beam to suit their setup.

Y-axis gantry uses two NC-synchronised brushless motors to reduce positioning errors
Carries out 5° beveling, engraving and writing
Twin version: independent double head increases productivity by up to 51%
18 mm duralumin worktop adjusts more than 10 times
Integrated water collection tank reduces the machine’s footprint

Source: listing by INNOVYNC on IndustrySearch · Updated 27 Oct 2026
Supplier document: CNC-Vetro_ENG (PDF)

AI Overview is generated by artificial intelligence and may contain mistakes.

Let INNOVYNC provide you with a quote

Supplier

Supplier: INNOVYNC

Location: Arndell Park, NSW

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. INNOVYNC are also proudly displaying these credentials:

Location:

Arndell Park , NSW

Joined:

Mar 2023

Level:

Premium Storefront

Verified: