Anton Paar Combined CO₂ and DO Meter: ...

Anton Paar - Combined CO₂ and DO Meter: CboxQC

Supplier: Anton Paar Australia

Combined CO₂ and DO Meter: CboxQC

Combined dissolved CO2 and DO measurements from kegs, and casks as well as directly from the process line or tank. When combined with our filling devices same is taken directly from the package into the measuring chamber.

Market leader in gas measurement

CO2 measurement method guarantees repeatability standard deviations of up to 0.005 vol. or 0.01 g/L (Standard version)
The new high-resolution optochemical O2 sensor is accurate and achieves a repeatability standard deviation of ± 2 ppb
Not influenced by other dissolved gases such as air or nitrogen
CO2 and DO results after only 90 seconds
PFD filling device transfers samples from the package into the measuring chamber without any loss of CO2
Low sample volume of around 100 mL (Standard version) provides reliable CO2 and DO results, even out of very small packages

Use built-in support for self-diagnosis and error detection

Intuitive user interface means easy menu navigation
Data logger function enables continuous CO2 and DO measurements from the line or tank
FillingCheck™ automatically detects filling errors and generates a warning message
Guided system check function verifies the tightness of the measuring chamber and the zero point of CO2 and O2 measurements

Clear sample identification for 500 traceable measurement results
RFID interface lets you make quick changes of measurement settings via RFID tag reading
Data is easily printed via Bluetooth® or transferred to a PC via USB

		Standard	At-line
Measuring range	CO2	0 g/L to 12 g/L (0 vol. to 6 vol.) at 30 °C (86 °F) 0 g/L to 20 g/L (0 vol. to 10 vol.) <15 °C (59 °F)
	O2	0 ppm to 4 ppm
	Temperature	–3 °C to 40 °C (27 °F to 104 °F), acc. ±0.2 °C
	Pressure	0 bar to 10 bar absolute (0 psi to 145 psi), acc. 0.01 bar
Repeatability s.d.	CO2	±0.01 g/L (0.005 vol.)	±0.04 g/L (0.02 vol.)
	O2	2 ppb (in the range <200 ppb)
Resolution	CO2	0.001 g/L	0.01 g/L
	O2	0.1 ppb (in the range from 0 ppb to 99.9 ppb)
Sample volume		>100 mL	>150 mL
Measuring units	CO2	g/L, vol., mg/L, kg/cm2, MPa, % w/w
	O2	ppm, ppb, hPa, mg/L, μg/L, % Air-sat., % O2-sat.
Measuring time		90 seconds
Data memory		500 measurement data sets
Built-in support		FillingCheck™, CO2 \| O2 Data Logger, threshold value functionality, system check
Portable use		Up to 11 hours continuous use
Communication interfaces		1x RS-232 (CAN-open[1]), 1x USB; optional: 1x RFID, 1x Bluetooth
Protection class		IP67
Dimensions (L x W x H)		258 mm x 201 mm x 170 mm (10.2 in x 7.9 in x 6.7 in)	262 mm x 209 mm x 176 mm (10.3 in x 8.2 in x 6.9 in)
Weight		2.6 kg (5.7 lbs)	2.7 kg (6 lbs)

[1] CboxQC only

CO2 measurement method guarantees repeatability standard deviations of up to 0.005 vol. or 0.01 g/L (Standard version)
The new high-resolution optochemical O2 sensor is accurate and achieves a repeatability standard deviation of ± 2 ppb
Not influenced by other dissolved gases such as air or nitrogen
CO2 and DO results after only 90 seconds
PFD filling device transfers samples from the package into the measuring chamber without any loss of CO2
Low sample volume of around 100 mL (Standard version) provides reliable CO2 and DO results, even out of very small packages

Use built-in support for self-diagnosis and error detection

Intuitive user interface means easy menu navigation
Data logger function enables continuous CO2 and DO measurements from the line or tank
FillingCheck™ automatically detects filling errors and generates a warning message
Guided system check function verifies the tightness of the measuring chamber and the zero point of CO2 and O2 measurements

Clear sample identification for 500 traceable measurement results
RFID interface lets you make quick changes of measurement settings via RFID tag reading
Data is easily printed via Bluetooth® or transferred to a PC via USB

		Standard	At-line
Measuring range	CO2	0 g/L to 12 g/L (0 vol. to 6 vol.) at 30 °C (86 °F) 0 g/L to 20 g/L (0 vol. to 10 vol.) <15 °C (59 °F)
	O2	0 ppm to 4 ppm
	Temperature	–3 °C to 40 °C (27 °F to 104 °F), acc. ±0.2 °C
	Pressure	0 bar to 10 bar absolute (0 psi to 145 psi), acc. 0.01 bar
Repeatability s.d.	CO2	±0.01 g/L (0.005 vol.)	±0.04 g/L (0.02 vol.)
	O2	2 ppb (in the range <200 ppb)
Resolution	CO2	0.001 g/L	0.01 g/L
	O2	0.1 ppb (in the range from 0 ppb to 99.9 ppb)
Sample volume		>100 mL	>150 mL
Measuring units	CO2	g/L, vol., mg/L, kg/cm2, MPa, % w/w
	O2	ppm, ppb, hPa, mg/L, μg/L, % Air-sat., % O2-sat.
Measuring time		90 seconds
Data memory		500 measurement data sets
Built-in support		FillingCheck™, CO2 \| O2 Data Logger, threshold value functionality, system check
Portable use		Up to 11 hours continuous use
Communication interfaces		1x RS-232 (CAN-open[1]), 1x USB; optional: 1x RFID, 1x Bluetooth
Protection class		IP67
Dimensions (L x W x H)		258 mm x 201 mm x 170 mm (10.2 in x 7.9 in x 6.7 in)	262 mm x 209 mm x 176 mm (10.3 in x 8.2 in x 6.9 in)
Weight		2.6 kg (5.7 lbs)	2.7 kg (6 lbs)