CRC - Corrosion Inhibitors - Urethane Seal Coat

Read more...

Need more information? Message CRC Industries via the form, or call and say you found them on IndustrySearch so they can best assist you.

There is no mixing, it eliminates excessive waste, it’s easy to apply and saves time and labour. CRC Urethane Seal Coat is ideal as: a protective coating for printed circuit boards, electric windings and armature coils.

PHYSICAL PROPERTIES:

• Flash Point (Open Cup) 43°C
• Specific Gravity (20°C) 0.86 +/-0.02
• Viscosity (25°C) 50cps
• Elongation 10%
• Temperature Resistance Should not exceed 100°C
• Adhesion (Bell Laboratory Test) Exceeds 10,000g
• Dielectric Strength (ASTM D877)
  • Red 2000 Volts/Mil
  • Clear 3000 Volts/Mil
• Dielectric Constant
  • 4.04 at 60Hz
  • 3.77 at 10Hz
  • 3.23 at 10Hz
• Volume Resistance 8.4 at 10 ohms/cm
• Surface Resistance 1.2 at 10 ohms/cm
• Oil resistance Passes ASTM D-115
• Average Film Thickness 15 Microns

Pack Size for Corrosion Inhibitors - CRC Urethane Seal Coat

• CRC Urethane Seal Coat (Part No. 2044) - 300g Aerosol (RED), 6 pack
• CRC Urethane Seal Coat (Part No. 2049) - 300g Aerosol (CLEAR), 6 pack

Read less...

Need more information? Message CRC Industries via the form, or call and say you found them on IndustrySearch so they can best assist you.