Sculptform - Curved Timber Batten

Features of this product

• Due to the steam bending process, we offer a limited range of timber species of coatings in our curved range. As with our entire range of products, custom solutions are available
• Each radius requires specialised equipment (formers) in order to produce the curved timber battens.
• To save on costs, we offer a range of radii as standard.
• Any custom radius within the parameters can be achieved.
• The most important restriction with steam-bent timber is the radius of the curve.
• Each timber species and profile combination performs differently when curved, with the minimum and maximum parameters for each shown in the table below. 
• Aligned joins maintain the join line throughout the wall or ceiling, ensuring consistency.
• Our curved timber process limits the lengths of timber achievable. The maximum length achievable is 2000mm, where the minimum length is 1300mm. This can be trimmed on-site to suit requirements.
• Due to the compression taking place in the grain of the timber during the stream bending process, compression marks may occur.

To contact Sculptform about Sculptform Curved Timber Batten use Get a quote.

Features of this product

• Due to the steam bending process, we offer a limited range of timber species of coatings in our curved range. As with our entire range of products, custom solutions are available
• Each radius requires specialised equipment (formers) in order to produce the curved timber battens.
• To save on costs, we offer a range of radii as standard.
• Any custom radius within the parameters can be achieved.
• The most important restriction with steam-bent timber is the radius of the curve.
• Each timber species and profile combination performs differently when curved, with the minimum and maximum parameters for each shown in the table below. 
• Aligned joins maintain the join line throughout the wall or ceiling, ensuring consistency.
• Our curved timber process limits the lengths of timber achievable. The maximum length achievable is 2000mm, where the minimum length is 1300mm. This can be trimmed on-site to suit requirements.
• Due to the compression taking place in the grain of the timber during the stream bending process, compression marks may occur.

Read less...

To contact Sculptform about Sculptform Curved Timber Batten use Get a quote.