Pallet Raking and More - Drive In Pallet Racking | Standard

Features of this product

• It is frequently used in facilities with a low number of product lines. 
• Pallets are stored in a block system with two blocks generally served by one operating aisle.
• Forklifts drive into the racking to load or retrieve pallets, which are stored on cantilevered rails running throughout the system.
• The first pallet in is the last pallet out, unless a drive-through system is used whereby pallets can be loaded or retrieved from either side. 
• Forklifts drive into lanes on racking specially designed to provide support to the pallet along the pallet sides.
• Stacking often up to 10-metres high and up to 10 pallets deep (more often 4 – 5 deep). 
• This system provides very dense storage capacity, often low in access and rotation of products.
• As the forklift enters the racking, special precautions are necessary to ensure the compatibility of design between the forklift, pallet, load and racking.
• Our engineer can provide specific details to ensure correct functionality. 
• Usually the rack design incorporates a stability structure at the rear of the rack and therefore drive in indicates single access from one side.
• Drive through requires this same stability to be provided by a variation in design.

To contact Pallet Racking And More about Pallet Raking and More Drive In Pallet Racking | Standard use Get a quote.

Features of this product

• It is frequently used in facilities with a low number of product lines. 
• Pallets are stored in a block system with two blocks generally served by one operating aisle.
• Forklifts drive into the racking to load or retrieve pallets, which are stored on cantilevered rails running throughout the system.
• The first pallet in is the last pallet out, unless a drive-through system is used whereby pallets can be loaded or retrieved from either side. 
• Forklifts drive into lanes on racking specially designed to provide support to the pallet along the pallet sides.
• Stacking often up to 10-metres high and up to 10 pallets deep (more often 4 – 5 deep). 
• This system provides very dense storage capacity, often low in access and rotation of products.
• As the forklift enters the racking, special precautions are necessary to ensure the compatibility of design between the forklift, pallet, load and racking.
• Our engineer can provide specific details to ensure correct functionality. 
• Usually the rack design incorporates a stability structure at the rear of the rack and therefore drive in indicates single access from one side.
• Drive through requires this same stability to be provided by a variation in design.

Read less...

To contact Pallet Racking And More about Pallet Raking and More Drive In Pallet Racking | Standard use Get a quote.