Eltek - Electricity Usage Transmitters for Energy / Power Analysers Get latest price

Electricity Usage Transmitters for Energy / Power Analysers

29 Recent Views In Stock

Need to know energy usage in, for instance, a domestic situation? Eltek GenII pulse transmitters and Rayleigh or Elster sub-meter systems provide a precise answer.

• Cost effective and accurate kwh measurement of any number of circuits
• A single transmitter can be connected to up to 8 sensors
• Can be used also with other pulse output device e.g. heatmeter
• Can be used with any Darca software
• Can be integrated with any other GenII transmitter type

60 Series

• GC62
  • 2 x pulse inputs (200Hz). Includes external DC supply input.
• GD67
  • 7 x pulse inputs (15Hz). Includes external DC supply input. With display.
• GD68
  • 8 x pulse inputs (15Hz). Battery powered only. With display.

These transmitters are supplied with 4 x LR6 AA alkaline batteries installed to provide 2 years operation if logging interval > 5 minutes. For logging intervals less than 5 mins an external DC supply (12VDC at 50mA) may be required (Transmitter types GC62 and GD67 only).

Sensors

Sensor	Current rating	Output	Max load
Rayleigh PRO1TE / PRO1D	0-45A	1 pulse per 0.5Wh	11.25kW
Rayleigh conto D2	5-63A	1 pulse per Wh	15.75kW
Rayleigh PRO75D-P	10-100A	1600 pulses per kWh	25kW
Elster AC100C	10-100A	1 pulse per 10Wh

• Rayleigh pulse energy monitor can be mounted in consumer unit
• Qualified electrical engineer must install.
• Version available for energy import/export eg. solar generation sytems
• Version with second pulse output for kvarh

Accessories

WBG Wall bracket docking kit

This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.

The following products are supported:

• All GD, GC, GL and GS series transmitters
• RP250GD repeater and RC250 receiver

 

Read more...

To contact Connected IoT about Eltek Electricity Usage Transmitters for Energy / Power Analysers use Get a quote.

Need to know energy usage in, for instance, a domestic situation? Eltek GenII pulse transmitters and Rayleigh or Elster sub-meter systems provide a precise answer.

• Cost effective and accurate kwh measurement of any number of circuits
• A single transmitter can be connected to up to 8 sensors
• Can be used also with other pulse output device e.g. heatmeter
• Can be used with any Darca software
• Can be integrated with any other GenII transmitter type

60 Series

• GC62
  • 2 x pulse inputs (200Hz). Includes external DC supply input.
• GD67
  • 7 x pulse inputs (15Hz). Includes external DC supply input. With display.
• GD68
  • 8 x pulse inputs (15Hz). Battery powered only. With display.

These transmitters are supplied with 4 x LR6 AA alkaline batteries installed to provide 2 years operation if logging interval > 5 minutes. For logging intervals less than 5 mins an external DC supply (12VDC at 50mA) may be required (Transmitter types GC62 and GD67 only).

Sensors

Sensor	Current rating	Output	Max load
Rayleigh PRO1TE / PRO1D	0-45A	1 pulse per 0.5Wh	11.25kW
Rayleigh conto D2	5-63A	1 pulse per Wh	15.75kW
Rayleigh PRO75D-P	10-100A	1600 pulses per kWh	25kW
Elster AC100C	10-100A	1 pulse per 10Wh

• Rayleigh pulse energy monitor can be mounted in consumer unit
• Qualified electrical engineer must install.
• Version available for energy import/export eg. solar generation sytems
• Version with second pulse output for kvarh

Accessories

WBG Wall bracket docking kit

This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.

The following products are supported:

• All GD, GC, GL and GS series transmitters
• RP250GD repeater and RC250 receiver

 

Read less...

To contact Connected IoT about Eltek Electricity Usage Transmitters for Energy / Power Analysers use Get a quote.