Hylec Controls Bearingless Digital ...

Hylec Controls - Bearingless Digital Torquemeters - Himmelstein

Supplier: Hylec Controls

Bearingless Digital Torquemeter 87000

Bearingless Digital Torquemeter 86000

The flange configuration of these models makes them ideal for applications where limited space is available for the installation of a torque transducer.

Video for Hylec Controls Bearingless Digital Torquemeters - Himmelstein

Precision Torque Measurement

17 Recent Views In Stock

The Bearingless Digital Torquemeters' ability to accommodate large misalignments between the rotor and stator and to tolerate mating metal components in close proximity separates them from similar competitive offerings.

Widest installed measurement bandwidth and fasted installed response
Simple to install, tolerant of wide rotor-stator misalignment
Lowest sensitivity to clamping loads
Highest over-range and overload
0.03% combined non-lienarity and hysteresis
Noise tolerant carrier amplification
Bi-directional rotor shunt calibration
No hoop or caliper antennae

They also offer the highest mechanical overload and electrical over-range eliminating the need to compromise accuracy for safety.

Additional characteristics include:

an extremely stiff torsional element and high dynamic response with 3kHz bandwidth
0.05% Accuracy
200% and 400% overload
No hoops or calipers
Insensitive to nearby metal
No manual adjustments
Analogue output
Digital Output with Temperature
FM output
10 units of measure
11 Bessel Data Filters
Max/Mins updated at 20kHz
Interface software Furnished
Zero Velocity pickup option

Himmelstein Bearingless Torquemeters use non-ISM frequencies for power and data, have field strengths within FCC rules, powerful 12-pole signal filters and near field (not radiated field) signal transfer.

The unit has a stainless-steel tank and two fixed baffles. We also offer as an extra, a lid with hollow legs that fits onto four locating pins mounted in the top corners of the tank. The leg height provides the lid top at bench height. The pump requires a 240V 10-amp single phase supply.

To contact Hylec Controls about Hylec Controls Bearingless Digital Torquemeters - Himmelstein use Get a quote.

Widest installed measurement bandwidth and fasted installed response
Simple to install, tolerant of wide rotor-stator misalignment
Lowest sensitivity to clamping loads
Highest over-range and overload
0.03% combined non-lienarity and hysteresis
Noise tolerant carrier amplification
Bi-directional rotor shunt calibration
No hoop or caliper antennae

They also offer the highest mechanical overload and electrical over-range eliminating the need to compromise accuracy for safety.

Additional characteristics include:

an extremely stiff torsional element and high dynamic response with 3kHz bandwidth
0.05% Accuracy
200% and 400% overload
No hoops or calipers
Insensitive to nearby metal
No manual adjustments
Analogue output
Digital Output with Temperature
FM output
10 units of measure
11 Bessel Data Filters
Max/Mins updated at 20kHz
Interface software Furnished
Zero Velocity pickup option

Read less...

To contact Hylec Controls about Hylec Controls Bearingless Digital Torquemeters - Himmelstein use Get a quote.

Let Hylec Controls provide you with a quote

Supplier

Get a quote

Supplier: Hylec Controls

Distribution: Australia and New Zealand

Location: Auburn, NSW

Customers: ADFA, Amcor, BHP, Boral, CSIRO, Ford, Hanson, Holcim, Lafarge Holcim, Rio Tinto, Thales

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Hylec Controls are also proudly displaying these credentials:

Established:

1979

Employees:

6-20

Customers:

ADFA, Amcor, BHP, Boral, CSIRO, Ford, Hanson, Holcim, Lafarge Holcim, Rio Tinto, Thales

Memberships:

Engineers Australia, Concrete Institute of Australia,

Certifications:

AEO Certification as Australian Trusted Trader

Distribution:

Australia and New Zealand