Hughes - Immersion Heated Emergency Tank ...

Get Callback
Call
BACK All Products > Safety Equipment > Emergency Safety Shower & Eye Wash

Hughes - Immersion Heated Emergency Tank Shower 1500L | H-EXPMH14KS1500

Hughes Safety H-EXPMH14KS1500 is designed to meet and exceed ANSI standards, this immersion heated emergency tank shower provides tepid water for over 15 minutes at a guaranteed flow of 76 litres per minute, even when there is no mains water supply.

Compare
Item Specifics
Contact supplier for price
Delivery Australia Wide
Availability: In Stock
Supplier Details
Spill Station Australia Pty Ltd (117 items)
1300 664 2..
Wetherill Park NSW

Suitable for use in hazardous and non-hazardous environments whatever the climate.

Features

  • Integral immersion heater, controlled by a dual thermostat, maintains the water in the tank at a constant temperature.
  • Low pressure shower rose delivers large quantities of water in an even pattern that is non-injurous to the user.
  • Thermal insulation assists in maintaining the water temperature in the tank to international standards in all climates.
  • Instant activation by panic bar or optional foot panel.
  • Optional eye/face wash can be mounted internally or externally.
  • Optional chiller unit for hot climates.
  • Electrical supply: 230V Single Phase, 50/60Hz (110V optional).
  • Location: Indoor, Outdoor
  • Climate: Hot (risk of over-heating), Cold (risk of freezing), Variable
  • Installation: Free Standing / Floor Mounted
  • Features: Eye/Face Wash
  • Framework: Stainless Steel
  • Capacity (Litres): 1500
Weight 340 kg
Dimensions 1420 × 1495 × 3746 mm
Inlet Connection Size & Type

3/4” BSP Female
Shower Operation

Panic bar (optional foot panel control)
Eye/face Wash Operation

Lift lid up (optional foot treadle control)
Supply Pressure

0.5 to 10 BAR G (7 to 145 PSI)
Flow at Operating Pressure

Shower – 76 litres/minute
Eye/Face wash – 12 litres/minute
Electrical Equipment - Non-hazardous

Suitable for use in areas classified as non-hazardous
Electrical Equipment - Hazardous

ATEX Zone 1 & 2. Gas groups IIA & IIB. Temp Class T3 (IIC available)
Materials of Construction

Shower Rose: GRP stainless steel
Piping & Valve Materials: uPVC and stainless steel
Control Valve – Shower: uPVC 11/2” BSP ball valve
Control Valve – Eye/face Wash: 1/2” 316L stainless steel full flow ball valve with stainless steel ball
Eye/face Wash Strainer: 1/2” stainless steel
Overflow: 1” BSP uPVC
Ballcock Valve: 2 x 1/2” BSP brass
Water Tank: 1500 litre (396 US Gallons) capacity heavy density polyethylene HDPE
Tank Surround and Lid: Heavy-duty GRP in white (green or yellow available)
Shower Frame and Legs: Stainless steel. Polished brush finish (paint options available)
Pull Rods for Valve Activation: Stainless steel
Foot Control Options: Panel foot control – Stainless steel/Treadle foot control – powder coated stainless steel
All Fasteners and Fixings: Stainless steel
Minimum Ambient Operating Temperature

16º C (60º F) (For 0º C (32º F)
Maximum Ambient Operating Temperature

40º C (104º F) (+55º C (131º F) with cooling unit fitted)
Spill Station Australia Pty Ltd | Your complete spill response & control solutions
Spill Station Australia specialises in providing a complete spill control solution for your company. Established in 1983, the range has expanded to include spill response kits, bunded spill containment ... read more
Contact supplier for specifications here
For more information contact the supplier. If calling, say you found them on IndustrySearch so they can best assist you.

Need more information? Message Spill Station Australia Pty Ltd via the form, or call and say you found them on IndustrySearch so they can best assist you.

Report this product