Induction Unit for Suspended Ceiling Type DID312 Get latest price

Induction Unit for Suspended Ceiling Type DID312

22 Recent Views In Stock

Induction Unit for Suspended Ceiling are active chilled beam with two-way air discharge, 300 mm nominal width, vertical heat exchanger and condensate drip tray.

Features

• Preferably for room heights up to 4.00 m
• High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
• High comfort levels due to low airflow velocity in the occupied zone
• Three nozzle variants to optimise induction based on demand
• Hinged, removable induced air grille in four designs

Optional equipment and accessories

• Control system
• Additional casing for extract air
• Heat exchanger powder-coated black
• Powder coating in many different colours, e.g. RAL CLASSIC

Application

• Active chilled beams of Type DID312 for the integration into various ceiling systems, preferably for room heights up to 4.00 m
• The vertical heat exchangers and the condensate drip tray are useful if the temperature temporarily falls below the dew point.
• 2-pipe or 4-pipe heat exchangers enable good comfort levels with a low conditioned primary air volume flow rate
• Energy-efficient solution since water is used for heating and cooling

Special characteristics

• The vertical heat exchanger with condensate drip tray is useful if the temperature temporarily falls below the dew point
• Hinged, removable induced air grille in four designs
• Heat exchanger as 2-pipe or 4-pipe system
• Internal nozzle plate with punched nozzles (non-combustible)
• Water connection at the narrow side, Ø12 mm Cu pipe, either with plain tails or with G½" external thread and flat seal

Nominal sizes

• 900, 1200, 1500, 1800, 2100, 2400, 2700, 3000 mm

Read more...

To contact TROX Australia about Induction Unit for Suspended Ceiling Type DID312 use Get a quote.

Induction Unit for Suspended Ceiling are active chilled beam with two-way air discharge, 300 mm nominal width, vertical heat exchanger and condensate drip tray.

Features

• Preferably for room heights up to 4.00 m
• High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
• High comfort levels due to low airflow velocity in the occupied zone
• Three nozzle variants to optimise induction based on demand
• Hinged, removable induced air grille in four designs

Optional equipment and accessories

• Control system
• Additional casing for extract air
• Heat exchanger powder-coated black
• Powder coating in many different colours, e.g. RAL CLASSIC

Application

• Active chilled beams of Type DID312 for the integration into various ceiling systems, preferably for room heights up to 4.00 m
• The vertical heat exchangers and the condensate drip tray are useful if the temperature temporarily falls below the dew point.
• 2-pipe or 4-pipe heat exchangers enable good comfort levels with a low conditioned primary air volume flow rate
• Energy-efficient solution since water is used for heating and cooling

Special characteristics

• The vertical heat exchanger with condensate drip tray is useful if the temperature temporarily falls below the dew point
• Hinged, removable induced air grille in four designs
• Heat exchanger as 2-pipe or 4-pipe system
• Internal nozzle plate with punched nozzles (non-combustible)
• Water connection at the narrow side, Ø12 mm Cu pipe, either with plain tails or with G½" external thread and flat seal

Nominal sizes

• 900, 1200, 1500, 1800, 2100, 2400, 2700, 3000 mm

Read less...

To contact TROX Australia about Induction Unit for Suspended Ceiling Type DID312 use Get a quote.