Home Trusted by 500,000+ buyers

Odour Neutralizing Vapor System

Supplier: PIIAN

Our most versatile odour control system for operation in freezing or high humidity conditions.

Price Guide: POA

For permanent installation along property boundaries of landfills, compost sites, sludge drying beds, soil remediation sites, around lagoons and ponds etc.

The system draws in large volumes of air where a lobe blower pressurises it to 1.5 PSI. Piian Odour Neutralizer is then vaporised into the air stream. The odour neutralizing vapor is blown into long distribution manifolds. The distribution manifolds have small holes drilled along their length. The odor neutralizing vapour is blown out through the holes and into the environment.

The distribution manifolds are built using common plastic piping material such as HDPE, cPVC, ABS etc in either 3", 4" or 6" diameters according to the size of the system. The distribution manifolds are installed along property perimeters to form a barrier between the source of the odour and the odour complaint. Odours leaving the property perimeter must pass through the barrier and will be destroyed by the odour neutralizer. A single barrier can be as long as 3000FT for our largest system, multiple systems are used to span longer distances.

  • Does not use water – does not require a water source
  • Works in freezing conditions down to -50 Degrees
  • Works in high humidity climates
  • Will not raise moisture levels, will not cause corrosion
  • No nozzles to maintain, no access to distribution manifold required
  • Best system for year round operation
  • 2 year / 10,000 hour warranty
  • Optional lifetime warranty
  • Capable of operating 24 hours per day, 7 days per week
  • <1 micron vapor droplet production, no wetting, dripping or waste
  • Proven design with industrial quality components
  • Robust lobe compressor technology
  • Industrial duty high capacity skid mounted blower module
  • PLC monitor for system conditions and faults
  • High capacity air filter
  • Stainless steel blower module chassis and cover
  • Epoxy painted blower module skid frame
  • Fully featured starter panel
  • Optional wind speed and direction activation
  • Optional environmental condition and equipment status data logging
  • Optional SMS error reporting
  • Complete project design consultation
  • Submittal drawings and documents to professional standards

Showcase your business!

Connect with 500,000 industrial buyers annually

Learn more