Featuring all 316L and Inconel X750 material, the AST5300 wet/wet differential pressure transducer is certified for use in Explosion-Proof and Non-Incendive areas. It's being offered by Bestech Australia.
The AST5300 is suitable for various liquids and gases requiring high line pressure (1500PSI) and low differential pressure (10 PSID) measurements.
One of advantages of the AST5300 differential pressure transducer is that the sensor is completely free of fluid fill cavities.
Through the use of an LVDT (Linear Variable Differential Transformer) and corrugated diaphragm, the AST5300 measures differential pressure without any oil-filled capsules, thus eliminating potential risk of leaks of silicone oil into the process fluid or gas. Applications such as cryogenic level, pharmaceutical processing equipment and gas compression systems all benefit from an oil-free design. For high purity gases and oxygen pressure applications, Bestech Australia can supply the AST5300 cleaned and packaged to meet the Praxair GS-38 standard.
The differential pressure transducer can also have full line pressure of 1500 PSI applied to either process connection without damage to the device. This can eliminate the added cost of certain five-way valves and expensive repair costs.
Standard options include 1/4" NPT female process connections, 4-20mA, 0.5-4.5V ratiometric, 0-5V, and 1-5V output signals, and conduit electrical connections. Class I, II and III Explosion proof (AST53ED) and Class I Division 2 non-incendive approvals (AST53EN) allow for safe installation in hazardous locations. For nonhazardous locations, connectors and cable are available.
Bestech Australia | Measurement Equipment & Technical Training Systems
Bestech Australia was founded in 2002 in Melbourne and is now one of the fastest growing companies in Australia and New Zealand, distributing and manufacturing sensors, transducers, signal conditioners ...