Omniterm - Signal Isolator with DIN Rail Mount - Model C2063

Supplier: Omniflex

Signal Isolator with DIN Rail Mount - Model C2063

Omniterm LPI. Loop powered (4-20mA) Isolator which provides 1500Vrms isolation on any current loop. Ultra Low Volt drop on input <3V.

1241 Recent Views In Stock

The OMNITERM LPI is a loop powered isolating current repeater specifically designed to isolate instrument current loops from circulating ground currents that can cause system inaccuracies, or at worst, instrument failure.

Insert in any 4-20mA current loop to isolate the instruments in the loop. The current applied to the input is repeated on the isolated output, and the load present on the output is reflected back to the input. No separate power source is required.

Forming part of OMNIFLEX’s extensive OMNITERM range of industrial instrumentation, the OMNITERM LPI is designed to be DIN rail mounted, and is 22.5mm wide.

For high density applications consider the dual version Omniterm LPD (model C2462A)

Isolate any instrument current loop to 1500Vac
Powered by the current loop
Load independent – no field calibration required
High load capability (1 kohm)
Reverse polarity and overload protected
Ultra-Low volt drop <3 Volts at 20 mA

For further information about Signal Isolator with DIN Rail Mount - Model C2063 visit Omniflex at http://www.omniflex.com/
OR
Use the IndustrySearch e-mail feature below and one of the Omniflex team will respond to your enquiry directly.

Reliable Products & Solutions In Industrial Instrumentation

To contact Omniflex about Omniterm Signal Isolator with DIN Rail Mount - Model C2063 use Get a quote.

Forming part of OMNIFLEX’s extensive OMNITERM range of industrial instrumentation, the OMNITERM LPI is designed to be DIN rail mounted, and is 22.5mm wide.

For high density applications consider the dual version Omniterm LPD (model C2462A)

Isolate any instrument current loop to 1500Vac
Powered by the current loop
Load independent – no field calibration required
High load capability (1 kohm)
Reverse polarity and overload protected
Ultra-Low volt drop <3 Volts at 20 mA

Read less...

To contact Omniflex about Omniterm Signal Isolator with DIN Rail Mount - Model C2063 use Get a quote.

Let Omniflex provide you with a quote

Supplier

Get a quote

Supplier: Omniflex

Distribution: Australia Wide & International

Location: Botany, NSW

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Omniflex are also proudly displaying these credentials:

Established:

1965

Employees:

21-50

Certifications:

ISO 9001

Distribution:

Australia Wide & International

Location:

Botany , NSW

Joined:

Jun 2006