Single & Dual Channel Rail Mount Loop Isolators | 9600 Series

These 0-30mA instruments are available as single or dual isolators in one 92 x 92 x 26mm wide package, and have galvanic isolation in excess of 1,000 volts between input and output.

Model 9600-B1 has a single isolator in the rail mount housing, while Model 9600-B2 has dual isolators fitted into the same housing. 

The dual unit may be used to isolate 2 separate loops or to provide 2 isolated loop outputs from a single loop input. 

Surface-mount electronics and transformer isolation make for an economical high-performance design with high accuracy and low transmission and linearity errors. 

The volt drop is less than 4 volts into the maximum 500-ohm output load. 

Instrotech loop isolators are CE and C-Tick EMC / EMI compliant and have a 3 year factory material and workmanship warranty.

• DIN rail mount 92 x 92 x 26 mm enclosure
• UL 94 V-0 flame retardant plastic
• Low cost - high performance design
• Loop powered - no additional power supply required
• 0 - 30mA input current
• Galvanic isolation between input and output >1000V
• Less than 0.25% transmission error and linearity error
• CE and C-Tick EMC and EMI compliant
• 3 year guarantee
• View Brochure Here

Model 9600-B2 Features:

• DIN rail mount 92 x 92 x 26 mm enclosure
• UL 94 V-0 flame retardant plastic
• Low cost - high performance design
• Loop powered - no additional power supply required
• 0 - 30mA input current
• Galvanic isolation between input and output >1000V
• Less than 0.25% transmission error and linearity error
• 2 loop isolators in the same enclosure
• CE and C-Tick EMC and EMI compliant
• 3 year guarantee
• View Brochure Here