Sheet Metal Shear | Cidan Evo

Supplier: Magnum Machinery

29 Recent Views In Stock

Compare

EVO proves our philosophy regarding low environment impact as the shear has low energy consumption, has a very low noise level and is designed for maximum serviceability.

EVO can be fitted with a manual back gauge (800 mm) with quick positioning from the front side of the machine and digital outread, the next step is the motorized back gauge with 750 or 1000 mm ball screw spindles including CutLink finger touch control. The EVO can be configured in many ways, thanks to the unique T-groove rails on the machine front where the sheet handling equipment can be re-arranged and exchanged. The machine is suitable for handling sensitive material through the wide variety of sheet handling equipment and pneumatic sheet support.

Standard Features:

Sturdy, low-noise gear motor (no chain and no hydraulics)
Single or continuous stroke control
Double edged blades for twice the running time
Finger protection
Blade gap adjustments
Pneumatic hold down beam for cutting soft material like aluminum
Foot pedal and button at the electrical cabinet to start the cut
Pneumatic sheet support with return plate (blanks to front side of shear)
Two T-groove rails on table for optional flexible sheet handling equipment
LED cutting line light

Options:

Manual back gauge 0-800 mm operated from the front side
Motorized back gauge with CutLink Control and ball screw spindles
Pneumatic sheet support with rolls 1000 mm (blanks to rear side of shear)
Moveable blank wagon instead of fixed return plate (extra blank wagon available)
Adjustable angle gauge system with graduated scale
Safety guard for rear side of the shear - mechanical or with light guard (safety guard required to fulfill CE directives) 750/800 mm or 1000 mm
Squaring arms, in length from 440 mm to 3000 mm, with or without tilting stops
Support arms in front, in length from 416 mm to 3000 mm, with or without tilting stops
Table pans, with or without ball transfers
Forced cooling for cutting motor

Need more information? Message Magnum Machinery via the form, or call and say you found them on IndustrySearch so they can best assist you.

Standard Features:

Sturdy, low-noise gear motor (no chain and no hydraulics)
Single or continuous stroke control
Double edged blades for twice the running time
Finger protection
Blade gap adjustments
Pneumatic hold down beam for cutting soft material like aluminum
Foot pedal and button at the electrical cabinet to start the cut
Pneumatic sheet support with return plate (blanks to front side of shear)
Two T-groove rails on table for optional flexible sheet handling equipment
LED cutting line light

Options:

Manual back gauge 0-800 mm operated from the front side
Motorized back gauge with CutLink Control and ball screw spindles
Pneumatic sheet support with rolls 1000 mm (blanks to rear side of shear)
Moveable blank wagon instead of fixed return plate (extra blank wagon available)
Adjustable angle gauge system with graduated scale
Safety guard for rear side of the shear - mechanical or with light guard (safety guard required to fulfill CE directives) 750/800 mm or 1000 mm
Squaring arms, in length from 440 mm to 3000 mm, with or without tilting stops
Support arms in front, in length from 416 mm to 3000 mm, with or without tilting stops
Table pans, with or without ball transfers
Forced cooling for cutting motor