Haco Metal Cutting Guillotine Shears | ...

Haco - Metal Cutting Guillotine Shears | TS(X) Price Guide: $66,950

Supplier: HACO Australia

Metal Cutting Guillotine Shears | TS(X)

1/3

Our TS guillotines are the most budget friendly machines in our shearing line.

49 Recent Views In Stock

The TS machines are guillotine type shears. This means that the cutting action is a scissors cutting action. The hydraulic cylinders on the TS shears are positioned directly underneath the ram and pull the ram in a downwards direction.

Guillotine shears have several advantages above swing-beam type shears. They are made to cut several material types and thicknesses.

Features:

All TS guillotines are standard fitted with the new SP9 control, conveniently located at the left hand side of the machine, within the immediate reach of the operator.
The TS machines are guillotine type shears. This means that the cutting action is a scissors cutting action. The hydraulic cylinders on the TS shears are positioned directly underneath the ram and pull the ram in a downwards direction.
Quick manual blade gap. The quick manual blade gap adjustment is located at the front of the machine on 6mm models, or at the rear of the machine for 12mm models. Blade gap adjustment ranges from 0,05mm for very light sheet thickness and progressively increases up to the maximum blade gap required for heavier shear capacities. The rake angle is electro-hydraulic driven and controlled from the operator pane. The angle adjustment moves between 0.5° for thin sheets and 3° for thicker sheets.
The right pressure setting. The sheet hold-downs on the TS guillotine models are hydraulic controlled and use a separate hydraulic circuit with separate pump. A pressure activated switch is used for the right pressure setting.

To contact HACO Australia about Haco Metal Cutting Guillotine Shears | TS(X) use Get a quote.

Features:

All TS guillotines are standard fitted with the new SP9 control, conveniently located at the left hand side of the machine, within the immediate reach of the operator.
The TS machines are guillotine type shears. This means that the cutting action is a scissors cutting action. The hydraulic cylinders on the TS shears are positioned directly underneath the ram and pull the ram in a downwards direction.
Quick manual blade gap. The quick manual blade gap adjustment is located at the front of the machine on 6mm models, or at the rear of the machine for 12mm models. Blade gap adjustment ranges from 0,05mm for very light sheet thickness and progressively increases up to the maximum blade gap required for heavier shear capacities. The rake angle is electro-hydraulic driven and controlled from the operator pane. The angle adjustment moves between 0.5° for thin sheets and 3° for thicker sheets.
The right pressure setting. The sheet hold-downs on the TS guillotine models are hydraulic controlled and use a separate hydraulic circuit with separate pump. A pressure activated switch is used for the right pressure setting.

Read less...

To contact HACO Australia about Haco Metal Cutting Guillotine Shears | TS(X) use Get a quote.

Haco TS(X) Guillotines(0.79MB)

AI Overview BETA

Haco TS(X) is a hydraulic guillotine shear for cutting sheet metal. Hydraulic cylinders sit directly beneath the ram and pull it downwards, creating the scissors action that distinguishes this guillotine from swing-beam shear types. Metalworking operations that cut several material types and thicknesses can use the TS machines for a range of sheet-metal shearing tasks.

SP9 control is standard, positioned left within the operator’s immediate reach
Blade gap: 0.05 mm for very light sheets, rising for heavier shear capacities
Electro-hydraulic rake adjustment: 0.5° for thin sheets to 3° for thicker sheets
Hydraulic sheet hold-downs use a separate circuit and pump
Pressure-activated switch sets the hold-down pressure

Source: listing by HACO Australia on IndustrySearch · Updated 2 Nov 2026
Supplier document: Haco TS(X) Guillotines (PDF)

AI Overview is generated by artificial intelligence and may contain mistakes.

Let HACO Australia provide you with a quote

Supplier

Supplier: HACO Australia

Distribution: Australia & New Zealand

Location: Cockburn Central, WA

Customers: Pressform, Phoenix, JT Contracting

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. HACO Australia are also proudly displaying these credentials:

Established:

1965

Employees:

1-5

Customers:

Pressform, Phoenix, JT Contracting

Memberships:

AMTIL

Certifications:

Distribution:

Australia & New Zealand

Location: