Enduroframe Steel Frame Rollformer | ENDURO® ...

Enduroframe - Steel Frame Rollformer | ENDURO®

Supplier: ENDUROFRAME

Steel Frame Rollformer | ENDURO®

The ENDURO® steel frame rollformer is designed with the factory in mind

Efficient steel frame manufacture

In Stock

This specialist high-speed steel frame rollformer manufactures all the C & U sections, as well as an optional L angle, required for walls, floors, and trusses designed with the ENDUROCADD® software. Our experienced team can take you through all stages of factory setup and training operators so you can get started making frames quickly.

Product Benefits:

ONE MACHINE MAKES ALL COMPONENTS: A single ENDURO® rollformer makes all the light gauge steel components required for roof trusses, wall frames, and floor trusses. The 90mm frames are even suitable for cyclonic areas!
LOCAL SUPPORT: Our experienced, Australian-based support team can get you up and running quickly and smoothly. With your permission, it is possible for the diagnosis of machine performance to be done remotely.
STRONG SECTIONS: Studs and truss sections are made from ribbed C sections which up to 20% stronger than non-ribbed C sections, and do not require crimping for easier assembly.
EASY SCHEDULING: The advanced ENDUROHUB® scheduling software sends files from the ENDUROCADD® software to ENDURO® rollformers. It enables frames and trusses to be rollformed in the sequence they need to be stacked. It can even optimise production across multiple rollformers!
HIGH SPEED: Punch locations on the ENDURO® rollformer are optimised to ensure the number of times the rollformer needs to stop are minimised, speeding up production times.
EASY ASSEMBLY: All parts are pre-punched with locating holes and precision notched. Trusses do not need to be flipped during assembly. Dual inkjet printers ensure that parts can be quickly identified for quick assembly and installation.
BRACKETS MADE OFF ROLLFORMER: Many brackets are made directly off the rollformer (some require the optional inline slitter).
QUALITY COMPONENTS: Components used in the rollformer are from industry standard suppliers such as Allen Bradley, Sick, Bonfiglioli, and Markem Imaje making replacements, if required, easy to source in the unlikely event of a breakdown.

Product Models:

Machine Type	ENDURO® 70	ENDURO® 75	ENDURO® 90
C Section Depth	70mm	75mm	90mm
U Section Depth	72.5mm	77.5mm	92.5mm
Gauges (BMT)	0.55mm, 0.75mm, 1.0mm		0.55mm, 0.75mm, 1.0mm, 1.2mm
Feed width	158mm	163mm	178mm

Standard Inclusions:

Commissioning of rollformer by our experienced team
Tools for operation of rollformer and quality control
Delivery to Australian capital cities including offloading container
Startup ink for printers
Skates to move rollformer around
Access to ENDUROHUB® scheduling package
Free ENDUROCADD® software licenses
Access to ENDURO® rollformer training and support portal
12 month warranty on mechanical components
Wireless remote pendant

To contact ENDUROFRAME about Enduroframe Steel Frame Rollformer | ENDURO® use Get a quote.

Product Benefits:

ONE MACHINE MAKES ALL COMPONENTS: A single ENDURO® rollformer makes all the light gauge steel components required for roof trusses, wall frames, and floor trusses. The 90mm frames are even suitable for cyclonic areas!
LOCAL SUPPORT: Our experienced, Australian-based support team can get you up and running quickly and smoothly. With your permission, it is possible for the diagnosis of machine performance to be done remotely.
STRONG SECTIONS: Studs and truss sections are made from ribbed C sections which up to 20% stronger than non-ribbed C sections, and do not require crimping for easier assembly.
EASY SCHEDULING: The advanced ENDUROHUB® scheduling software sends files from the ENDUROCADD® software to ENDURO® rollformers. It enables frames and trusses to be rollformed in the sequence they need to be stacked. It can even optimise production across multiple rollformers!
HIGH SPEED: Punch locations on the ENDURO® rollformer are optimised to ensure the number of times the rollformer needs to stop are minimised, speeding up production times.
EASY ASSEMBLY: All parts are pre-punched with locating holes and precision notched. Trusses do not need to be flipped during assembly. Dual inkjet printers ensure that parts can be quickly identified for quick assembly and installation.
BRACKETS MADE OFF ROLLFORMER: Many brackets are made directly off the rollformer (some require the optional inline slitter).
QUALITY COMPONENTS: Components used in the rollformer are from industry standard suppliers such as Allen Bradley, Sick, Bonfiglioli, and Markem Imaje making replacements, if required, easy to source in the unlikely event of a breakdown.

Product Models:

Machine Type	ENDURO® 70	ENDURO® 75	ENDURO® 90
C Section Depth	70mm	75mm	90mm
U Section Depth	72.5mm	77.5mm	92.5mm
Gauges (BMT)	0.55mm, 0.75mm, 1.0mm		0.55mm, 0.75mm, 1.0mm, 1.2mm
Feed width	158mm	163mm	178mm

Standard Inclusions:

Commissioning of rollformer by our experienced team
Tools for operation of rollformer and quality control
Delivery to Australian capital cities including offloading container
Startup ink for printers
Skates to move rollformer around
Access to ENDUROHUB® scheduling package
Free ENDUROCADD® software licenses
Access to ENDURO® rollformer training and support portal
12 month warranty on mechanical components
Wireless remote pendant

Read less...

To contact ENDUROFRAME about Enduroframe Steel Frame Rollformer | ENDURO® use Get a quote.

AI Overview BETA

Enduroframe’s ENDURO rollformer forms C and U sections, with an optional L angle. ENDUROHUB sends ENDUROCADD files to the machine and sequences production for stacking, helping organise frame and truss output. Manufacturers making roof trusses, wall frames and floor trusses get one machine for all the required light-gauge steel components used in each of those assemblies.