Cebora TIG Welder | TIG 1640 DC HF

Cebora - TIG Welder | TIG 1640 DC HF

Supplier: Cebora Welding Cutting

TIG Welder | TIG 1640 DC HF

The POWER TIG 1640 DC HF is a DC TIG/MMA welding power source, inverter technology. In TIG mode the arc is started either in HF or with the Cebora lift system.

In Stock

Features of this product

It features a 2 stage/4 stage selection key, while the remote control device allows to connect a foot control or, alternatively, to work with a torch fitted with an up/down control.
The welding current can be adjusted from 5 to 160 A and two potentiometers allow respectively the slope down and the post-gas function adjustment.
This power source represents the entry level model in the complete range of Cebora DC TIG welding power sources and is mainly intended for maintenance and repair work, as well as for small productions.The compliance with EN 61000-3-12 brings substantial energy saving and a wide supply voltage tolerance (+15% / -20%). The power source can be powered by motor generators of adequate power (Min. 6 KVA).

To contact Cebora Welding Cutting about Cebora TIG Welder | TIG 1640 DC HF use Get a quote.

Features of this product

It features a 2 stage/4 stage selection key, while the remote control device allows to connect a foot control or, alternatively, to work with a torch fitted with an up/down control.
The welding current can be adjusted from 5 to 160 A and two potentiometers allow respectively the slope down and the post-gas function adjustment.
This power source represents the entry level model in the complete range of Cebora DC TIG welding power sources and is mainly intended for maintenance and repair work, as well as for small productions.The compliance with EN 61000-3-12 brings substantial energy saving and a wide supply voltage tolerance (+15% / -20%). The power source can be powered by motor generators of adequate power (Min. 6 KVA).

To contact Cebora Welding Cutting about Cebora TIG Welder | TIG 1640 DC HF use Get a quote.