AVEMAX MANFORD - VERTICAL MACHINING CENTER Price Guide: $112,000

VERTICAL MACHINING CENTER

VERTICAL MACHINING CENTER

INTRODUCTION:-

MODEL: MVL-760, DIRECT DRIVE SPINDLE BT40 10,000 RPM, FANUC OiMF TYPE 3, ATC 24

X/Y/Z 760/406/508 MM

• MEEHANITE licensed castings are annealed and stress relieved to ensure maximum precision and vibration absorption.
• Linear guideways provide fast and smooth movements to ensure excellent machining results and high accuracy.
• Axis motors are directly coupled with ball screws, featuring highly efficient motion control, fast response, and low noise.
• Every contact sliding surface is applied with Turcite-B that maximizes the durability of slideways and features optimum damping coefficient. The mating surfaces are precision hand scraped to increase the flatness and improve geometric accuracy of the whole assembly.
• Telescopic steel way covers on three axes to protect ways and ballscrews from chips and coolant.

TABLE
Table size	915 x 400mm
T-slot of table (size x Q’ty)	14 x 3mm
Max. table load	440Kgs
TRAVEL
X axis	760mm
Y axis	406mm
Z axis	508mm
Spindle nose to table surface	102~610mm
FEED RATE
Rapid feedrate X/Y/Z	48/48/36M/min
Cutting feedrate X/Y/Z	10/10/10M/min
SPINDLE
Spindle taper	BT40
Spindle speed (RPM)	10000RPM
Transmission	Direct drive
Spindle motor	7.5/11KW(15HP)
TOOL MAGAZINE
ATC type/ capacity	Arm type/24
Max. tool diameter	Full: 80mm / Next empty: 150mm
Max. tool length	300mm
Max. tool weight	7Kgs
OTHER ITEMS
Tank capacity	220L
Chip conveyor	Screw type
Lubrication system/ oil tank capacity	Volumetric/4.09L
Air source	0.6Mpa
Power requirement	20KVA
Machine floor space (WxDxH)	3654x3543x2592mm
Machine net weight (approx.)	2900Kgs

Read more...

To contact TJ Machine Tools about AVEMAX MANFORD VERTICAL MACHINING CENTER use Get a quote.

INTRODUCTION:-

MODEL: MVL-760, DIRECT DRIVE SPINDLE BT40 10,000 RPM, FANUC OiMF TYPE 3, ATC 24

X/Y/Z 760/406/508 MM

• MEEHANITE licensed castings are annealed and stress relieved to ensure maximum precision and vibration absorption.
• Linear guideways provide fast and smooth movements to ensure excellent machining results and high accuracy.
• Axis motors are directly coupled with ball screws, featuring highly efficient motion control, fast response, and low noise.
• Every contact sliding surface is applied with Turcite-B that maximizes the durability of slideways and features optimum damping coefficient. The mating surfaces are precision hand scraped to increase the flatness and improve geometric accuracy of the whole assembly.
• Telescopic steel way covers on three axes to protect ways and ballscrews from chips and coolant.

TABLE
Table size	915 x 400mm
T-slot of table (size x Q’ty)	14 x 3mm
Max. table load	440Kgs
TRAVEL
X axis	760mm
Y axis	406mm
Z axis	508mm
Spindle nose to table surface	102~610mm
FEED RATE
Rapid feedrate X/Y/Z	48/48/36M/min
Cutting feedrate X/Y/Z	10/10/10M/min
SPINDLE
Spindle taper	BT40
Spindle speed (RPM)	10000RPM
Transmission	Direct drive
Spindle motor	7.5/11KW(15HP)
TOOL MAGAZINE
ATC type/ capacity	Arm type/24
Max. tool diameter	Full: 80mm / Next empty: 150mm
Max. tool length	300mm
Max. tool weight	7Kgs
OTHER ITEMS
Tank capacity	220L
Chip conveyor	Screw type
Lubrication system/ oil tank capacity	Volumetric/4.09L
Air source	0.6Mpa
Power requirement	20KVA
Machine floor space (WxDxH)	3654x3543x2592mm
Machine net weight (approx.)	2900Kgs

Read less...

To contact TJ Machine Tools about AVEMAX MANFORD VERTICAL MACHINING CENTER use Get a quote.