Wood-Mizer Automated Edger Machines | ...
Wood-Mizer - Automated Edger Machines | EA3000
The Automated Edger uses optical scanning technology to achieve high precision and low waste edging of boards. The entire edging process is automated with each board being positioned and then scanned.
The Automated Edger uses optical scanning technology to achieve high precision and low waste edging of boards. The entire edging process is automated with each board being positioned and then scanned. The profile of each board is analyzed by a computer, which decides on the best product to maximize recovery. Decisions are based on both volume recovery and product value.
The V-AE is capable of handling up to 12 boards per minute at 6.7 m or 15 boards per minute at 3.4 m . It is the ideal machine to edge boards coming from the resaw. Electric servo sizing system achieves any width of cut without complication.
Parallel PLC / computer control systems allow the machine to be switched over to manual mode with a single button. Online support allows our technicians to dial into your machine to troubleshoot it remotely.
Overall, the Automated Edger is a simple, robust and automated solution to your edging needs.
Features
- Optical scanning on the run
- Short footprint
- Can be fed from both sides
- Unscrambler and infeed included
- Easy to use windows interface
- Mechanised material handling for fast, accurate board alignment
Specifications:
Power Selections
- Power Selections30kW electric
- 45kW electric
Cutting Capacities
- Min Width of Cut40 mm (1.5”)
- Max. Material Thickness75mm (3")
- Production Rate1-25 boards/min (average)
Blade
- Number of Blades2
- Blade Diameter450 mm (17 1/2")
- Blade Kerf5 mm (0.195”)
- Blade Adjustment MethodElectric Servo
- Blade positionTwo Centered Blades
Feed System & Operation
- Feed Speed150 - 250m/min (500 - 820ft/min)
- Board AlignmentAutomated mechanical board alignment
- Material Hold-downPowered Pneumatic Roller Hold-downs
- Feed Motor11kW (15HP)
- ScanningOptical Material Scanner System
- Operator ControlsStationary Control Station
- OptionsIn-line or transverse board scanning
To contact Wood-Mizer Australia about Wood-Mizer Automated Edger Machines | EA3000 use Get a quote.
The Automated Edger uses optical scanning technology to achieve high precision and low waste edging of boards. The entire edging process is automated with each board being positioned and then scanned. The profile of each board is analyzed by a computer, which decides on the best product to maximize recovery. Decisions are based on both volume recovery and product value.
The V-AE is capable of handling up to 12 boards per minute at 6.7 m or 15 boards per minute at 3.4 m . It is the ideal machine to edge boards coming from the resaw. Electric servo sizing system achieves any width of cut without complication.
Parallel PLC / computer control systems allow the machine to be switched over to manual mode with a single button. Online support allows our technicians to dial into your machine to troubleshoot it remotely.
Overall, the Automated Edger is a simple, robust and automated solution to your edging needs.
Features
- Optical scanning on the run
- Short footprint
- Can be fed from both sides
- Unscrambler and infeed included
- Easy to use windows interface
- Mechanised material handling for fast, accurate board alignment
Specifications:
Power Selections
- Power Selections30kW electric
- 45kW electric
Cutting Capacities
- Min Width of Cut40 mm (1.5”)
- Max. Material Thickness75mm (3")
- Production Rate1-25 boards/min (average)
Blade
- Number of Blades2
- Blade Diameter450 mm (17 1/2")
- Blade Kerf5 mm (0.195”)
- Blade Adjustment MethodElectric Servo
- Blade positionTwo Centered Blades
Feed System & Operation
- Feed Speed150 - 250m/min (500 - 820ft/min)
- Board AlignmentAutomated mechanical board alignment
- Material Hold-downPowered Pneumatic Roller Hold-downs
- Feed Motor11kW (15HP)
- ScanningOptical Material Scanner System
- Operator ControlsStationary Control Station
- OptionsIn-line or transverse board scanning
To contact Wood-Mizer Australia about Wood-Mizer Automated Edger Machines | EA3000 use Get a quote.
The Wood-Mizer EA3000 is an automated edger that scans boards and cuts them to width as part of a complete edging process. Its optical scanner profiles each board, letting the computer select cuts by volume recovery and product value to maximise material recovery. Sawmills edging resaw output can change from computer control to manual operation with one button.
- Up to 12 boards/min at 6.7 m or 15 boards/min at 3.4 m
- 30 kW or 45 kW electric power selections
- Minimum cut width 40 mm; maximum material thickness 75 mm
- Feed speed of 150–250 m/min
- Unscrambler and infeed are included
Source: listing by Wood-Mizer Australia on IndustrySearch · Updated 31 Oct 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Wood-Mizer Australia on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
-280x280-state_7.jpg)
Industrial Sawmill | WM2500
Twin Vertical Saw | TVS HD for Industrial Sawmilling Operation
Gang Saw | MR200
Automatic Dual Tooth Setter | BMT250
Manual Dual Tooth Setter | BMT200
Manual Tooth Setter | BMT150
Manual Tooth Setter | BMT100
Bandsaw Blade Sharpener and Setter | BMST50
Bandsaw Blade Sharpener | BMS250
Chip Extractor Base | MD400
SlabMizer Slab Flattening Mill | MB100
Moulder Machine | MP100
Three-in-one Moulder Planer | MP220
Thicknesser | MP200
SlabMizer Slab Flattener | MB200
Chip Extractor Base | MD500
Four Sided Planer Moulder | MP260
Dehumidification Kiln Kit | KD550
Dehumidification Wood Kiln | KD250
Dehumidification Wood Kiln | KD450
Board Edger | EG800
Sawmill Machine | LT20
Sawmill Machine | LT15POWER
Twin Head Resaw Machines | HR2500
Resaw Machine | HR2000
Horizontal Resaw Machines | HR1000
Horizontal Resaw Machines | HR700
-280x280-state_7.jpg)
Horizontal Resaw Machines | HR500
Horizontal Resaw Machines | HR300
Horizontal Resaw Machines | HR130
Horizontal Resaw Machines | HR120
Multirip Edger Machine | MR3000
Automated Edger Machine | EA1000
Industrial Twin Blade Board Edger Machine | EG400
Multirip Board Edger Machine | EG300
-280x280-state_7.jpg)
Twin Blade Edger Machine | EG200
-280x280-state_7.jpg)
Twin Blade Board Edger Machine | EG100
Single Blade Edger Machine | EG50
Multirip Edger Machine | MR5000
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales