3D Printer | Aurarum Vega 600 IDEX

3D Printer | Aurarum Vega 600 IDEX

Supplier: Aurarum

3D Printer | Aurarum Vega 600 IDEX

3D Printer | Aurarum Vega 600 IDEX

3D Printer | Aurarum Vega 600 IDEX

The 3d printer has a build volume up to 625x530x730. It comes with dual extruders that allow you to 3d print either in 2 colours/materials

In Stock

IDEX mode creates two beds – it like having too printers or double production rate:

Copy mode allows printing parts up to 330x530x730
In mirror mode bed us 325x530x730

Dual independent extruders – IDEX allows multiple modes of printing:

Single material single extruder
Two colour printing
Main material plus supports material dual extruder printing
Copy mode – two of the same parts being printed at the same time.
Mirror mode printing
Mirror and copy printing modes double printing speed

Easy to remove extruders – all it takes is to undo 2 screws and disconnect single cable

This allows easy swap bettween the spare extruders potentially having different nozzles

Easy to maintain

Quality components – we use Hiwin linear rails and four ballscrews for the motion system

All 4 Ballscrews are independent and thus llows four corner levelling

Motion X/Y: Hiwin linear rails, 10mm GT2 belts suitable up to 120C

High quality large gear extruders made by Bondtech

Ensured great extrusion properties and compatibility with soft materials as well

They require little to no maitenance

Controller: Duet3d with a touchscreen

Wifi connectivity for the file transfer and printer control

Duet controllers run on RepRap firmware that is used industry wide as a reliable solution

It is widely used in industrial application

Allows future feature integration with relatively easy upgrade installation

Our printers come with Auto Bed Levelling that is done utilising BLtouch sensor

Bed: 16mm tooling grade cast aliuminium bed for maximum flatness

This grade of aliuminium reduces warping possibility

The printer comes with a magnetic PEI bed that works really well with most materias

The bed can be used up to 120C

Chamber is not heated from it heats up to 55-60C from the bed

Phaetus Rapido Plus Ultra High Flow hotends are used in Vega printers

These extruders have flow of over 80mm3/s (depending on the material and the nozzle size)

The hotend is capable up to 350C and can be fitted with hardened nozzles

To contact Aurarum about 3D Printer | Aurarum Vega 600 IDEX use Get a quote.

IDEX mode creates two beds – it like having too printers or double production rate:

Copy mode allows printing parts up to 330x530x730
In mirror mode bed us 325x530x730

Dual independent extruders – IDEX allows multiple modes of printing:

Single material single extruder
Two colour printing
Main material plus supports material dual extruder printing
Copy mode – two of the same parts being printed at the same time.
Mirror mode printing
Mirror and copy printing modes double printing speed

Easy to remove extruders – all it takes is to undo 2 screws and disconnect single cable

This allows easy swap bettween the spare extruders potentially having different nozzles

Easy to maintain

Quality components – we use Hiwin linear rails and four ballscrews for the motion system

All 4 Ballscrews are independent and thus llows four corner levelling

Motion X/Y: Hiwin linear rails, 10mm GT2 belts suitable up to 120C

High quality large gear extruders made by Bondtech

Ensured great extrusion properties and compatibility with soft materials as well

They require little to no maitenance

Controller: Duet3d with a touchscreen

Wifi connectivity for the file transfer and printer control

Duet controllers run on RepRap firmware that is used industry wide as a reliable solution

It is widely used in industrial application

Allows future feature integration with relatively easy upgrade installation

Our printers come with Auto Bed Levelling that is done utilising BLtouch sensor

Bed: 16mm tooling grade cast aliuminium bed for maximum flatness

This grade of aliuminium reduces warping possibility

The printer comes with a magnetic PEI bed that works really well with most materias

The bed can be used up to 120C

Chamber is not heated from it heats up to 55-60C from the bed

Phaetus Rapido Plus Ultra High Flow hotends are used in Vega printers

These extruders have flow of over 80mm3/s (depending on the material and the nozzle size)

The hotend is capable up to 350C and can be fitted with hardened nozzles

To contact Aurarum about 3D Printer | Aurarum Vega 600 IDEX use Get a quote.

Let Aurarum provide you with a quote

Supplier

Supplier: Aurarum

Location: Ringwood, VIC

Is this your product? Manage products / company details |

Report this product

More from this supplier

See all 2 items

3D Scanner | HX

3D Scanner | HX

3D Printer | Aurarum Vega 600 IDEX

3D Printer | Aurarum Vega 600 IDEX

Contact Aurarum

Industrial 3D Printer in Melbourne

Industrial 3D Printer in Adelaide

Industrial 3D Printer in Sydney

Industrial 3D Printer in Darwin

Industrial 3D Printer in Brisbane

Industrial 3D Printer in Perth

Are you an Industrial 3D Printer supplier?

Reach valuable industrial buyers in minutes

Promote key products & content

Drive cost effective & measurable sales

learn more