The pressure or the outlet of air pump can be regulated when the machine is running, there is no need to buy any high cost speed changeable motor or drive device.
No damage to our air pumps if running with no input for a long time.
The input pressure will never exceed the output pressure. No need to buy any pressure release device or by-pass.
The outlet of our air pumps can be shut down at any time if necessary. Pump will stop immediately and won't cause any power waste, heat production or any abrasion damage. If you want to start the pump again, just open the outlet of the pump and it will start automatically.
The efficiency of our pump will never be reduced by any abrasion.
Manual, remote or automatic control can be used to regulate the pumping output.
In normal conditions, our air pumps are suitable for explosion environments without the need for any explosion proof motor or controller. Our Air Pumps are explosion proof.
The flow rate regulation is controlled by air valve so no need for reflux device.
Our air pump diaphragms are of highest quality.
Our air pumps are small and light, and very mobile.
Advantage Over other Types of Pumps Include:
Very simple to control
Efficiency is constant even when pressure or flow rate is changed
Allows idle running & suction head to 21" (6M)
Various pumping speed possible
Various pressures possible (to 125PSI)
No mechanical seal
No rotating parts (or Internal bearings)
Idle running doesn't cause any damage to pump parts
No connectors needed
Pressure balance (no oil pressured valve)
Efficiency stays unchanged even if part abrasions occur
Available in many sizes in Aluminium, Stainless Steel and Polypropylene.
Specialised Air Motors & Transmission | Air Motors and Power Transmissions Equipment
Specialised Air Motors & Transmission is committed to providing clever solutions for all hazardous environments and continues to develop smart ways to meet requirements from all different industries; ...