Alfa Laval CIP Station

Alfa Laval - CIP Station

Supplier: Alfa Laval

CIP Station

The Alfa Laval CIP Station is a modularised, skid-mounted unit for automated cleaning-in-place of brewery process installations, with Plug & Play utility modules.

Plug & Play modules

Automated cleaning-in-place of brewery process installations, including piping systems, tanks, filling machines and heat exchangers.
Modularised, skid-mounted plug-in unit with standard component modular design.
Plug & Play modules for utilities save installation and commissioning time.
Pre-erected and pre-tested design without surprises.
Easy inspection and maintenance.
Fully adjustable cleaning regime to suit the target system’s cleaning time, temperature, pressure and flow requirements.
Automatically controls temperature, flow and detergent concentration in the CIP return line throughout the cleaning cycle.
Automatic make-up of cleaning solutions, started by the operator or automatically at a specified time or after a selected number of cleaning sequences.

Cleaning solution is pumped through a specially designed plate heat exchanger and heated to the required temperature.
The heated solution is routed to the object being cleaned and returned to the circulation tank included in the CIP module.
After each cleaning phase, the solution is routed to drain or returned to the detergent tank for later re-use.
A normal sequence can include an initial water rinse, lye cleaning, intermediate water rinse, acid cleaning and final water rinse, followed by chemical or hot water disinfection.

Automated cleaning-in-place of brewery process installations, including piping systems, tanks, filling machines and heat exchangers.
Modularised, skid-mounted plug-in unit with standard component modular design.
Plug & Play modules for utilities save installation and commissioning time.
Pre-erected and pre-tested design without surprises.
Easy inspection and maintenance.
Fully adjustable cleaning regime to suit the target system’s cleaning time, temperature, pressure and flow requirements.
Automatically controls temperature, flow and detergent concentration in the CIP return line throughout the cleaning cycle.
Automatic make-up of cleaning solutions, started by the operator or automatically at a specified time or after a selected number of cleaning sequences.

Cleaning solution is pumped through a specially designed plate heat exchanger and heated to the required temperature.
The heated solution is routed to the object being cleaned and returned to the circulation tank included in the CIP module.
After each cleaning phase, the solution is routed to drain or returned to the detergent tank for later re-use.
A normal sequence can include an initial water rinse, lye cleaning, intermediate water rinse, acid cleaning and final water rinse, followed by chemical or hot water disinfection.