Amada Press Brake Bending Robot | HG-1003ARs ...
Amada - Press Brake Bending Robot | HG-1003ARs
High accuracy bending robot system
Adaptation to variable-mix variable-volume production of various-shaped parts. The processing time is reduced by automatic setup and the processing range of complex parts is expanded.
The HG-1003ARs has adopted a high-end press brake, dubbed HG-ATC and equipped with a new hybrid drive system and a tool changer enabling automatic setup for step bend layout. Material loading, material handling during bending, and part unloading are all performed by a single 7-axis articulated robot capable of various motions.
The HG-1003ARs system can bend complex-shaped parts without setups and can run for long hours.
Features
- Features(1) : 7-axis articulated robot
- A 7-axis articulated robot is adopted for singly performing all of material loading, material handling during bending, and part unloading.
- Features(2) : Applications to suit various shapes
- Automatic gripper changer (AGC)
- Can store a total of nine combination-type and vacuum-type grippers.
- Features(3) : Angle sensor
- The angle sensor Bi-S is installed to support angle correction without test bending from the first part.
Specifications
|
Capacity |
Maximum |
Minimum |
Payload |
Automatic tool changer |
|
|---|---|---|---|---|---|
|
HG-1003ARs |
1000 |
1000×800 |
150×150 |
20 |
Number of die stockers : 18 |
To contact Amada Oceania about Amada Press Brake Bending Robot | HG-1003ARs use Get a quote.
Adaptation to variable-mix variable-volume production of various-shaped parts. The processing time is reduced by automatic setup and the processing range of complex parts is expanded.
The HG-1003ARs has adopted a high-end press brake, dubbed HG-ATC and equipped with a new hybrid drive system and a tool changer enabling automatic setup for step bend layout. Material loading, material handling during bending, and part unloading are all performed by a single 7-axis articulated robot capable of various motions.
The HG-1003ARs system can bend complex-shaped parts without setups and can run for long hours.
Features
- Features(1) : 7-axis articulated robot
- A 7-axis articulated robot is adopted for singly performing all of material loading, material handling during bending, and part unloading.
- Features(2) : Applications to suit various shapes
- Automatic gripper changer (AGC)
- Can store a total of nine combination-type and vacuum-type grippers.
- Features(3) : Angle sensor
- The angle sensor Bi-S is installed to support angle correction without test bending from the first part.
Specifications
|
Capacity |
Maximum |
Minimum |
Payload |
Automatic tool changer |
|
|---|---|---|---|---|---|
|
HG-1003ARs |
1000 |
1000×800 |
150×150 |
20 |
Number of die stockers : 18 |
To contact Amada Oceania about Amada Press Brake Bending Robot | HG-1003ARs use Get a quote.
The Amada HG-1003ARs is a robotic press brake system that bends parts, using an articulated robot for material loading, handling during bending and unloading. The Bi-S angle sensor supports angle correction on the first part without a test bend. For variable-mix, variable-volume production, it processes complex-shaped parts without setups, expanding the range of parts it can bend.
- Seven-axis articulated robot
- Automatic gripper changer stores nine grippers across combination and vacuum types
- 1,000 kN capacity; 20 kg payload including gripper
- Maximum workpiece size: 1,000 x 800 mm; minimum: 150 x 150 mm
- Automatic tool changer has 18 die stockers and 15 punch stockers
Source: listing by Amada Oceania on IndustrySearch · Updated 6 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Amada Oceania on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
NC Tapping Machine
Deburring Machine | IBT-610II
Deburring Machine | IBT-V
Shearing Machine | ESH Series
Shearing Machine | AT.F Series
Robotic Laser Welding Machine | FLW-3000EN
Press Brake Bending Robot | HG-1003ARs
Press Brake Bending Robot | EG-6013AR
Press Brake | RG-M2 Series
Press Brake | HG-ATC Series
Turret Punch Press | LS-2612E
Turret Punch Press | EM-ZR Series
Punch & Fiber Laser Cutting Combination Machine | EML-AJ Series
Fiber Laser Cutting Machine | VENTIS-AJ Series
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales