Aricas Gear Head Bench Drill, 3Mt, 240V ...
Aricas - Gear Head Bench Drill, 3Mt, 240V 1Ph
Aricas Gear Head Bench Drill, 3Mt, 240V 1Ph
Product Details
- Drilling Capacity Cast Iron: 40mm
- Drilling Capacity Steel: 32mm
- Spindle Taper: #3MT
- Spindle Nose to Base: 620mm
- Spindle to Column: 275mm
- Diameter of Column: 110mm
- Quill Diameter: 75mm
- Quill Travel: 120mm
- Swing: 550mm
- Head Tilting: 90° Right & Left
- Head Swivel: 360°
- Spindle Speeds (240v) : 100, 220, 380, 760, 1240, 2500rpm
- Spindle Speeds (415v) : 50, 100, 190, 380, 670, 1250rpm
- Overall Height: 1075mm
- Base Dimensions: 450 x 650mm
- N.W. / G.W. : 220 / 245kg
- Shipping Dimensions : 800 x 780 x 1120mm
To contact Southern Tool and Fastener Co about Aricas Gear Head Bench Drill, 3Mt, 240V 1Ph use Get a quote.
Product Details
- Drilling Capacity Cast Iron: 40mm
- Drilling Capacity Steel: 32mm
- Spindle Taper: #3MT
- Spindle Nose to Base: 620mm
- Spindle to Column: 275mm
- Diameter of Column: 110mm
- Quill Diameter: 75mm
- Quill Travel: 120mm
- Swing: 550mm
- Head Tilting: 90° Right & Left
- Head Swivel: 360°
- Spindle Speeds (240v) : 100, 220, 380, 760, 1240, 2500rpm
- Spindle Speeds (415v) : 50, 100, 190, 380, 670, 1250rpm
- Overall Height: 1075mm
- Base Dimensions: 450 x 650mm
- N.W. / G.W. : 220 / 245kg
- Shipping Dimensions : 800 x 780 x 1120mm
To contact Southern Tool and Fastener Co about Aricas Gear Head Bench Drill, 3Mt, 240V 1Ph use Get a quote.
The Aricas gear head bench drill is a benchtop machine for drilling cast iron and steel workpieces with its #3MT spindle and geared drive. Its head swivels through 360° to position the drill at different angles around the workpiece during setup. Metalworking and machining workshops can tilt the head to either side for angled drilling setups.
- Drilling capacity: 40mm in cast iron and 32mm in steel
- Six spindle speeds at 240V: 100, 220, 380, 760, 1,240 and 2,500rpm
- Quill travel: 120mm
- Swing: 550mm
- Spindle nose to base: 620mm
Source: listing by Southern Tool and Fastener Co on IndustrySearch · Updated 2 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Southern Tool and Fastener Co on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
-280x280-state_7.jpg)
Diesel Trailer Fuel Tank | 1200L
Bulldozer | D5N XL
Coldsaw | 250Mm 240V 1Ph 40Rpm Double Vice
Dual Mitre Bandsaw, 2 Speed 415V 3Ph
Belt Grinder 3.0Kw 415V 3Ph Belt Size 75 X 2000Mm
Petrol Generator | EU70is
Gear Head Floor Drill, 3Mt, 240V 1Ph
Gear Head Bench Drill, 3Mt, 240V 1Ph
Pipe Bevelling Machine | Bmp40 240V Single Phase Cap
1/2″ To 2″ Hydraulic Pipe Bender
Angle Grinder | M7-QB7114
Pedestal Drills | MetalMaster GHD-38B Geared Head Drill
Geared Head Drill | Machtech HDGH40
A2608 Geared Head Drill
A2608M Geared Head Drill
A3808 Geared Head Drill
A3808M Geared Head Drill
Bench & Floor Drills
MSL 886 | Pedestal Drill Fitted on Steel Bench
Bench Drill Press 3-Speed Mini | TBM220
Bench Drill | 1516
Bench Drill Press TBH
Geared Head Drill | 50-1450RPM GHD-38B
Gear Head Floor Drill, 3Mt, 240V 1Ph
Drill Press Gear Head | A-40
-280x280-state_7.jpg)
Geared Head Drill Single Phase | TGD400-1
Drill Press | Gear Head | SM-GPD55AR
Pedestal Drill | 2020P | 1-1/2HP 20MM CHUCK 3MT
Geared Head Pedestal Drill | Iberdrill B-40
Geared Head Pedestal Drill | Rong Fu 205CF
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales