AUSROAD Horizontal Discharge Unit Trucks ...

AUSROAD - Horizontal Discharge Unit Trucks - HD Series

Supplier: Ausroad

Horizontal Discharge Unit Trucks - HD Series

Backed by a three-year warranty, the AUSROAD™ Horizontal Discharge Unit (HD Series) is designed to deliver asphalt or quarry products.

26 Recent Views In Stock

It’s suitable for a variety of maintenance tasks dependent on optionally fitted equipment. It is a premium quality road maintenance machine utilising low-cost materials to produce high quality road repairs.

It’s suitable for large/small pothole patching, heavy maintenance, patch compaction and general maintenance repairs.

Low maintenance operation
High quality construction, leading to long-life body
Flexible additional equipment to suit individual applications.

Specifications

Approximately 2.5m³ to 6m³ hopper capacity, able to receive and discharge
- Quarry products up to 75mm in particle size
- Hot mix asphalts
- Cold mix premix asphalts
- 3-14mm aggregate
- 10-40mm crushed base aggregates.
‘Reversing floor’ conveyor system to discharge material to rear of hopper
Controls both in cab and at machine’s rear
Material is discharged horizontally to ground
Shovel bin and other attachments as specified by local council

Emulsion Systems

Pressurised emulsion tank (volume to be confirmed upon ordering)
Vessels are built to AS 1210 1997 standards
Fitted with doubling pads and stress relieved to Class 2B requirements for transportable vehicles
All pressurised emulsion tanks have independent safety relief valves and pressure gauges. This is separate from the regulator and gauge that is used to set pressure.
Working pressure is 40 PSI with safety set at 50 PSI
All pressure tanks have non-return valves to eliminate backflow.

Emulsion Filling

Filling the emulsion tank is quick and efficient via a two-inch cam lock
All operations can be conducted from ground level
Self-contained equipment can be supplied to allow filling from 210-litre drums
Heating of emulsion can be done either via Inline Heating (from emulsion tank to nozzle) or Overnight Heating (within emulsion tank).

Heating of Emulsion

Inline heat exchanger using waste heat from truck cooling systems included.
Overnight 240 V heating of emulsion within the emulsion tank is another heating option standard on all Ausroad^® Units.

Pressurised Water / Kerosene Tanks

Galvanised steel water tank with a minimum capacity 100 litres, 40 litres kero. – Larger tanks are available upon request.

Hopper

Single hopper 2.5m³ to 6m³ hopper capacity.
Hopper 4mm steel walls, 5mm steel plate hopper floor
From the hopper, material is discharged to:
- Rear via horizontal slat chain type conveyor (reversible) to,
- Either direct to ground, into shovel bin at mid-thigh height for ergonomic shoveling, side chute
- Attachments as specified by individual council (or other Ausroad^® optional equipment ie: Aggregate Spreader or Asphalt Paving Unit).

Conveyor Chain SS188 Rivet Chain

Pins – Alloy steel, case-hardened
Bushings – Carbon steel, case-hardened
Sidebars – Carbon steel, heat-treated
Scrapper bars – 50 x 20mm, alloy steel, heat-treated.

Paint (Powder Coating)

Standard ARTIC white or a colour as required.
The body is sand-blasted to class 2.5
Under coated zinc, powder primer ‘Corro Zinc’ (epoxy)
Top coat ‘white’ powder coating, (polyester powder).

To contact Ausroad about AUSROAD Horizontal Discharge Unit Trucks - HD Series use Get a quote.

It’s suitable for large/small pothole patching, heavy maintenance, patch compaction and general maintenance repairs.

Low maintenance operation
High quality construction, leading to long-life body
Flexible additional equipment to suit individual applications.

Specifications

Approximately 2.5m³ to 6m³ hopper capacity, able to receive and discharge
- Quarry products up to 75mm in particle size
- Hot mix asphalts
- Cold mix premix asphalts
- 3-14mm aggregate
- 10-40mm crushed base aggregates.
‘Reversing floor’ conveyor system to discharge material to rear of hopper
Controls both in cab and at machine’s rear
Material is discharged horizontally to ground
Shovel bin and other attachments as specified by local council

Emulsion Systems

Pressurised emulsion tank (volume to be confirmed upon ordering)
Vessels are built to AS 1210 1997 standards
Fitted with doubling pads and stress relieved to Class 2B requirements for transportable vehicles
All pressurised emulsion tanks have independent safety relief valves and pressure gauges. This is separate from the regulator and gauge that is used to set pressure.
Working pressure is 40 PSI with safety set at 50 PSI
All pressure tanks have non-return valves to eliminate backflow.

Emulsion Filling

Filling the emulsion tank is quick and efficient via a two-inch cam lock
All operations can be conducted from ground level
Self-contained equipment can be supplied to allow filling from 210-litre drums
Heating of emulsion can be done either via Inline Heating (from emulsion tank to nozzle) or Overnight Heating (within emulsion tank).

Heating of Emulsion

Inline heat exchanger using waste heat from truck cooling systems included.
Overnight 240 V heating of emulsion within the emulsion tank is another heating option standard on all Ausroad^® Units.

Pressurised Water / Kerosene Tanks

Galvanised steel water tank with a minimum capacity 100 litres, 40 litres kero. – Larger tanks are available upon request.

Hopper

Single hopper 2.5m³ to 6m³ hopper capacity.
Hopper 4mm steel walls, 5mm steel plate hopper floor
From the hopper, material is discharged to:
- Rear via horizontal slat chain type conveyor (reversible) to,
- Either direct to ground, into shovel bin at mid-thigh height for ergonomic shoveling, side chute
- Attachments as specified by individual council (or other Ausroad^® optional equipment ie: Aggregate Spreader or Asphalt Paving Unit).

Conveyor Chain SS188 Rivet Chain

Pins – Alloy steel, case-hardened
Bushings – Carbon steel, case-hardened
Sidebars – Carbon steel, heat-treated
Scrapper bars – 50 x 20mm, alloy steel, heat-treated.

Paint (Powder Coating)

Standard ARTIC white or a colour as required.
The body is sand-blasted to class 2.5
Under coated zinc, powder primer ‘Corro Zinc’ (epoxy)
Top coat ‘white’ powder coating, (polyester powder).

Read less...

To contact Ausroad about AUSROAD Horizontal Discharge Unit Trucks - HD Series use Get a quote.

AI Overview BETA

The AUSROAD HD Series is a horizontal discharge unit truck range for carrying and delivering asphalt or quarry products. Its reversible floor conveyor carries material to the rear of the hopper, then discharges it horizontally at ground level. For large or small pothole patching and other road maintenance repairs, optional attachments can be fitted to suit the application.

3-year warranty
Approx. 2.5–6 m³ hopper capacity
Quarry products up to 75 mm particle size
Hot- and cold-mix asphalt, 3–14 mm aggregate and 10–40 mm crushed base aggregates
Controls in the cab and at the machine’s rear

Source: listing by Ausroad on IndustrySearch · Updated 2 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Ausroad provide you with a quote