Autovalet (R) Stand Alone Foam Wash Pressure ...
Autovalet (R) Stand Alone Foam Wash Pressure Cleaner
The Auto Valet (R) Foam Wash - Stand Alone is the ideal machine for Service Stations or single bay car washes.
Built to withstand the test of time our AutoValet (r) Foam Car Wash system has been manufactured from scatch at our Factory in Bayswater Victoria. Manufactured in Stainless Steel and assembled with high quality parts to ensure the long lasting operation of this machine. The machine comes in HOT or COLD, coin operated or token operated.
The hot water version of this machine requires 3 Phase Power. For those without 3 Phase power then cold water would be the option.
The coin operation mechanism and token system allows one to set the time and value of the wash.
The machine features an operation selection of OFF, PREWASH, FOAM WASH, PRESSURE WASH, RINSE AND WAX. It comes with a non scratch hogs hairbrush for cleaning cars.
Specifications:
- Coin or Token Operated - Electronic coin timer, fully adjustable with TIME REMAINING display
- Pressure Pump - 1500PSI using triplex ceramic plungers – water consumption 9 L/min
- Direct Drive Motor - 2.2kw (3HP) 415V 3 PHASE, 1450rpm
- Pulsation Chemical Pump - Compressed air generated high density foam using mains pressure water and detergent.
Connection and Site Requirements:
- Power 415v 3 phase 30 AMP supply (5 pin plug) - HOT WATER
- 240v 10amp single phase – COLD WATER
- Water – normal ½” water supply (water volume minimum 15 lpm)
- Air Compressed at 30 PSI min
Included Accessories:
- Twin swivel booms, one for a pressure spray gun, the other for the foam brush
- 2 x 5mtr hoses
- Gun with swivel lance 700mm S/S
- Non scratch brush and wand
- 1 x 5ltr wash
- 1 x 1ltr wax/polish
- Inbuilt chemical tanks
To contact Jetblaster about Autovalet (R) Stand Alone Foam Wash Pressure Cleaner use Get a quote.
Built to withstand the test of time our AutoValet (r) Foam Car Wash system has been manufactured from scatch at our Factory in Bayswater Victoria. Manufactured in Stainless Steel and assembled with high quality parts to ensure the long lasting operation of this machine. The machine comes in HOT or COLD, coin operated or token operated.
The hot water version of this machine requires 3 Phase Power. For those without 3 Phase power then cold water would be the option.
The coin operation mechanism and token system allows one to set the time and value of the wash.
The machine features an operation selection of OFF, PREWASH, FOAM WASH, PRESSURE WASH, RINSE AND WAX. It comes with a non scratch hogs hairbrush for cleaning cars.
Specifications:
- Coin or Token Operated - Electronic coin timer, fully adjustable with TIME REMAINING display
- Pressure Pump - 1500PSI using triplex ceramic plungers – water consumption 9 L/min
- Direct Drive Motor - 2.2kw (3HP) 415V 3 PHASE, 1450rpm
- Pulsation Chemical Pump - Compressed air generated high density foam using mains pressure water and detergent.
Connection and Site Requirements:
- Power 415v 3 phase 30 AMP supply (5 pin plug) - HOT WATER
- 240v 10amp single phase – COLD WATER
- Water – normal ½” water supply (water volume minimum 15 lpm)
- Air Compressed at 30 PSI min
Included Accessories:
- Twin swivel booms, one for a pressure spray gun, the other for the foam brush
- 2 x 5mtr hoses
- Gun with swivel lance 700mm S/S
- Non scratch brush and wand
- 1 x 5ltr wash
- 1 x 1ltr wax/polish
- Inbuilt chemical tanks
To contact Jetblaster about Autovalet (R) Stand Alone Foam Wash Pressure Cleaner use Get a quote.
Pressure Cleaner | Petrol
Autovalet (R) Stand Alone Foam Wash Pressure Cleaner
Autovalet Stand Alone Pressure Washer | HPW3ET
Mobile Cold Water Pressure Washer
Cold Water Stationary Pressure Cleaner
Electric Heated Pressure Cleaners | Detailer Series
Electric Heated Pressure Cleaners | Slimline
Diesel Heated Pressure Cleaners | Universal Series
Petrol Pressure Cleaners
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales