Barrier Group Barrier Group Manual Vehicle ...

Barrier Group - Barrier Group Manual Vehicle Swing Gate System Price Guide: $1,113

Supplier: Ramp Champ

Barrier Group Manual Vehicle Swing Gate System 1

Barrier Group Manual Vehicle Swing Gate System 2

1/2

Manually Operated Customisable And Mountable Vehicle Swing Gate System

In Stock

The manual Vehicle Swing Gate system is perfect for areas where there is not enough space for rolling or sliding a gate. They can be used to replace the old steel gates and are very light and easy for operating manually. Possess high resistance to rust and looks very good at the entrance. It is suitable for both commercial as well as industrial uses.

It can be easily mounted to a bollard or any kind of solid surface for preventing pedestrians from entering the unsafe or restricted areas. It requires manual operation by a person for opening and closing the gate It features a 3-5meter aluminium beam with a yellow powder coating and a red or white reflective panel. Moreover, you will also be provided with steel bollards along with receiver posts and wall receivers if you want.

Features and Benefits

Manually operated swing gates.
Can be mounted to optional bollards or any solid surface.
Standard 5 metre rail can be cut down to any length

A custom 3-metre gate can be made (with a minimal fee) if you prefer not to personally cut down the item

Aluminium rail includes a hi-viz reflective panel.
Optional receiver post is available.
Range of round and square bollards on request.
Full installation service available.

Specifications

Description:	Manual swing gate.
Operation:	Push open/push close.
Construction:	Steel post with aluminium rail.
Gate Swing:	180 degrees.
Gate Stop:	Receiver bracket.
Receiver Post:	Optional.
Maximum Opening:	5000mm wide.
Minimum Opening:	3000mm wide.
Mounting Type:	Post or wall.
Rail Type:	Aluminium 145 x 40mm.
Rail Height:	1000mm above floor.
Finish:	Powder coated with reflective.

Features and Benefits

Manually operated swing gates.
Can be mounted to optional bollards or any solid surface.
Standard 5 metre rail can be cut down to any length

A custom 3-metre gate can be made (with a minimal fee) if you prefer not to personally cut down the item

Aluminium rail includes a hi-viz reflective panel.
Optional receiver post is available.
Range of round and square bollards on request.
Full installation service available.

Specifications

Description:	Manual swing gate.
Operation:	Push open/push close.
Construction:	Steel post with aluminium rail.
Gate Swing:	180 degrees.
Gate Stop:	Receiver bracket.
Receiver Post:	Optional.
Maximum Opening:	5000mm wide.
Minimum Opening:	3000mm wide.
Mounting Type:	Post or wall.
Rail Type:	Aluminium 145 x 40mm.
Rail Height:	1000mm above floor.
Finish:	Powder coated with reflective.