All of our standard size tanks including 1000L, 2000L, 4000L, 6000L and 8000L are registered and certified for use in Australia. These tank designs meet all the requirements for GB150.3 Pressure vessels and AS4343-2014 Pressure equipment, Hazard levels, Hazard levelB.
All tanks have 25% headspace minimum
Interior Shell: SUS304 fully welded; TH = 3mm
Exterior Shell: SUS304 fully welded; TH = 2mm
100% TIG Welding with pure argon gas shield
Interior full polished to 0.2~0.4 μm
Insulated with high density Polyurethane foam; TH=80mm
Glycol Jacket: Dimpled plate on cone and side
Dished head and 60 degree cone bottom
TC connected CIP arm with 360° coverage spraying ball
CO2 blow-off arm with butterfly valve
Full sanitary metallic sealed sampling valve
Rotating racking arm and port on cone with butterfly valve
Thermowell for high accuracy temperature sensor
SUS304 heavy duty legs with levelling pad and leg supports
Carbonation port TC with stone optional
We can also offer slimline 1000L Fermentation Tanks for Brewpub locations that have space constraints.
Brewtique | Brewing Equipment
There’s a fine line between a profitable brewery and the alternative. Success comes down to ensuring the right equipment and processes are in place from the start. At Brewtique, we are brewing specialists, ...