The BUMAX 88 and 109 fasteners are developed to achieve ultimate tensile and yield strength values in line with those of Steel-screws in class 8.8 and 10.9. The BUMAX products can also give top performance long after standard fasteners have reached their limits. The difference compared to conventional products is especially noticeable in extreme environments.
The BUMAX fasteners are manufactured from a new variant of acid-proof Swedish steel SS 14.2343. The striking feature of the steel’s composition is its low Carbon content and increased content of Chromium and Nickel. Laboratory tests and practical application have shown that the special composition gives BUMAX products unsurpassed perfomance in a number of vital areas.
Corrosion is a very difficult problem in damp and abrasive environments. The combination of low carbon content and the increased content of alloying elements gives the fasteners Bumax 88 and 109 superior resistance to corrosion.
Lower weight, same strength
As modern constructions develop, we are constantly aiming for minimum weight combined with retained or increased strength. Bumax 88 and Bumax 109 fasteners offer unique strength properties in relation to their weight. Fasteners of conventional standards often need two or three times the weight to manage the same job as a Bumax fastener.
Developed for demanding environments
Water, aggressive liquids, vibration, high pressure, extreme temperatures – today’s constructions must be able to withstand many harsh conditions and forces. It is here that the difference between Bumax products and conventional fasteners can be most clearly seen. When it comes to high strength, weight minimisation or a corrosive environment, the Bumax 88 and 109 fasteners are the superior solution.
Anzor carries a range of Hex Head Bolts, Hex Head Setscrews and Hex Nuts in Bumax 88 and Bumax 109. Additional ietms such as Socket Head Capscrews can be brought in to order.
EXTENSIVE RANGE - FAST SERIVCE - QUALITY TESTED
Anzor imports and carries an extensive range of stainless fasteners and fittings. In addition to our seven New Zealand branches, we are pleased to announce the opening of our new Brisbane branch. Anzor has been supplying stainless fabricators, industrial users, and the marine market for 19 years, and we take pride in fast and accurate service. We carry a very wide range of stainless fastener types and sizes, and can also supply fasteners in special stainless alloys, such as Duplex 2205. We also stock in stainless: BSP and NPT fittings, pipe and tube fittings, hose clamps, U bolts, circlips, piano hinge, key steel, wire rope, marine hardware, and lots more. There is no minimum order quantity, and Anzor's target is for all orders placed by 3pm to be dispatched the same day. Quality is also an absolute priority - we only deal with the most reputable factories, and further run a material testing program using an X-Ray Spectrometer.
For more information see: www.anzor.com.au or contact Brad Allard on ph 07 3711 9977 or 0427 777 915, fax 07 3711 9777, or email: email@example.com. Visit us at 15 Overlord Place (cnr Beaudesert Rd & Bradman St), Acacia Ridge, Brisbane.