Up to four cards can be operated, with each piggy-backing off the next. The CAN bus is connected using a 9-pin D-Sub plug on the slot brackets supplied. There is galvanic isolation of up to 500 Volts between the computer and CAN sides.
Form factor PC/104
Use of the 120-pin connection for the PCI bus
Up to four cards can be used in one system
4 High-speed CAN channels (ISO 11898-2)
Bit rates from 5 kbit/s up to 1 Mbit/s
Compliant with CAN specifications 2.0A (11-Bit-ID) und 2.0B (29-Bit-ID)
Connection to CAN bus through D-Sub slot brackets, 9-pin (in accordance with CiA® 303-1)
FPGA implementation of the CAN controller (SJA1000 compatible)
NXP PCA82C251 CAN transceiver
Galvanic isolation on the CAN connection up to 500 V, separate for each CAN channel
5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
Two slot brackets with D-Sub connectors for the CAN bus
Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-Bit)
CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.
Programming interface PCAN-Basic for developing applications with CAN connection
Programming interfaces for standardized protocols from the automotive sector
Manual in PDF format
Embedded Logic Solutions | Embedded Systems Development
Embedded Logic Solutions is a distributor for leading suppliers in the fields of PCB Prototyping & Design, Embedded Development Tools, Single Board Computers, Model Driven Development Tools, CAN Tools and USB/PCI Device Driver Development Tools.
Some of the suppliers that we work together with are Keil, LPKF, Coverity, Mechatronic Systems, Number One, Phytec, Peak System, Lauterbach, Ellisys, Mapusoft and Systec.