Car Hoists
Car Hoists
Southwell's car hoists lift can lower motor vehicles between floors where space is at a premium, transferring cars from service facilities to show-rooms and parking / storage levels.
Our truck lift can carry a full sized truck and they can be installed in ride-on and non-ride-on formats.
Benefits of Car Hoists
- Space effective alternative to concrete car park ramps enabling additional parking spaces
- Provides a solution where the site is too small for a conventional car park
- Maximise number of vehicles in car dealership showroom
- Cost effective alternative to a traditional car lift
- Minimal pit & overrun requirements
- Self diagnostic programmable logic control (PLC)
- Low maintenance costs
Options for Car Hoists
Standard Car Hoists (Hoisting the Vehicle Only) Include:
-
- Finishes - industrial enamel or 2 pack epoxy, stainless steel or aluminium chequer plate etc
- Door with ventilation slots, steel or aluminium, galvanised or powder coated roller shutters or panel lift doors with continuous rated door motors
- Doors opposite sides or same sides
- Additional doors for double entry/exit of hoist
- 2 level, 3 level or 4 level
- Fabricated steel ramp if applicable
- Ride-On Car Hoists (Enabling the driver to remain in vehicle) include the above & the following options:
- Walls and roof on platform
- Inside platform control with Emergency exit system
- Remote control feature is added to call hoist to the appropriate level & open door for easy entry
- Emergency telephone
- Emergency back up light
All Southwell hoists exceed the design and safety standard requirements of the Australian Standards and all OH&S regulations.
Main Dimensions for Car Hoists | SCH-6030
- Platform (l x w) - 6m x 3m
- Capacity (kg) - 3000
- Shaft Length (mm) - 6050
- Shaft Width (mm) - 3600
- Pit Depth (mm) - 400
Warranty for Car Hoists
3 years full warranty and 10 year structural warranty (subject to service agreement with Southwell Lifts & Hoists).
To contact Southwell Lifts & Hoists about Car Hoists use Get a quote.
Our truck lift can carry a full sized truck and they can be installed in ride-on and non-ride-on formats.
Benefits of Car Hoists
- Space effective alternative to concrete car park ramps enabling additional parking spaces
- Provides a solution where the site is too small for a conventional car park
- Maximise number of vehicles in car dealership showroom
- Cost effective alternative to a traditional car lift
- Minimal pit & overrun requirements
- Self diagnostic programmable logic control (PLC)
- Low maintenance costs
Options for Car Hoists
Standard Car Hoists (Hoisting the Vehicle Only) Include:
-
- Finishes - industrial enamel or 2 pack epoxy, stainless steel or aluminium chequer plate etc
- Door with ventilation slots, steel or aluminium, galvanised or powder coated roller shutters or panel lift doors with continuous rated door motors
- Doors opposite sides or same sides
- Additional doors for double entry/exit of hoist
- 2 level, 3 level or 4 level
- Fabricated steel ramp if applicable
- Ride-On Car Hoists (Enabling the driver to remain in vehicle) include the above & the following options:
- Walls and roof on platform
- Inside platform control with Emergency exit system
- Remote control feature is added to call hoist to the appropriate level & open door for easy entry
- Emergency telephone
- Emergency back up light
All Southwell hoists exceed the design and safety standard requirements of the Australian Standards and all OH&S regulations.
Main Dimensions for Car Hoists | SCH-6030
- Platform (l x w) - 6m x 3m
- Capacity (kg) - 3000
- Shaft Length (mm) - 6050
- Shaft Width (mm) - 3600
- Pit Depth (mm) - 400
Warranty for Car Hoists
3 years full warranty and 10 year structural warranty (subject to service agreement with Southwell Lifts & Hoists).
To contact Southwell Lifts & Hoists about Car Hoists use Get a quote.
Southwell car hoists lift and lower motor vehicles between floors, transferring cars from service facilities to showrooms and parking or storage levels. A self-diagnostic programmable logic controller helps operators identify faults in the hoist’s controls. Car dealerships can use them to increase the number of vehicles displayed when a site cannot fit a conventional car park ramp.
- SCH-6030 capacity: 3,000 kg
- Platform dimensions: 6 m x 3 m
- Ride-on hoists let the driver remain in the vehicle
- Southwell hoists exceed Australian Standards design and safety requirements and all OH&S regulations
- 3-year full and 10-year structural warranty, subject to service agreement
Source: listing by Southwell Lifts & Hoists on IndustrySearch · Updated 3 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Southwell Lifts & Hoists on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Car Hoists/Lifts by Southwell
Quality Australian Made Lifts & Hoists
Goods Personnel Hoists servicing up to 4 levels
Freestanding Goods Hoists / Freight Lifts
Preventative Maintenance Servicing
High Lift Refrigerated Catering Vehicles
Airport Equipment Design & Refurbishments
Ground Support Equipment (GSE)
Car Hoists
Goods Hoists | In Shaft
Goods Hoists | Free Standing
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales