Classic Lift Australia Tyre Changer with ...

Classic Lift Australia - Tyre Changer with Swing Arm - CL868TR

Supplier: Classic Lift Australia

Tyre Changer with Swing Arm - CL868TR

1/6

Tyre Changer with Swing Arm - CL868TR

In Stock

The Classic CL868TR Tyre changer with Power supply – 240V – 415V motor and tilting Back post and The clamping range of the Classic CL868TR allows the operator to clamp most Outside clamping:12″~26″/15″~28″ Inside clamping:15″~28″ Max tyre width:3″~14″

Product Features:

Pedal-operated blast inflation
The direction switch adopts high strength pure silver contact points.
Backward-style flat tire changer
Full-automatic assistant arm device
Adopting pneumatic tilt-back vertical column and push-pull horizontal arm pneumatic unlocking design
Dismounting flat tire will not hurt rim and tire
Alloy scavenging air valve, valve rod adopts stainless steel
Bead breaker protector increases 6mm and adopts anti-slip design

Product Specifications:

Power supply – 240V – 415V
Max. wheel diameter – (1180 mm )
Max wheel width – 14″(355mm)
Outside clamping – 12″~26″
Inside clamping – 15″~28″
Air supply – 8bar-10bar

To contact Classic Lift Australia about Classic Lift Australia Tyre Changer with Swing Arm - CL868TR use Get a quote.

Product Features:

Pedal-operated blast inflation
The direction switch adopts high strength pure silver contact points.
Backward-style flat tire changer
Full-automatic assistant arm device
Adopting pneumatic tilt-back vertical column and push-pull horizontal arm pneumatic unlocking design
Dismounting flat tire will not hurt rim and tire
Alloy scavenging air valve, valve rod adopts stainless steel
Bead breaker protector increases 6mm and adopts anti-slip design

Product Specifications:

Power supply – 240V – 415V
Max. wheel diameter – (1180 mm )
Max wheel width – 14″(355mm)
Outside clamping – 12″~26″
Inside clamping – 15″~28″
Air supply – 8bar-10bar

Read less...

To contact Classic Lift Australia about Classic Lift Australia Tyre Changer with Swing Arm - CL868TR use Get a quote.

AI Overview BETA

The Classic Lift Australia CL868TR is a tyre changer that clamps wheels for tyre removal and fitting, with a maximum tyre width of 355 mm. Its pneumatic tilt-back column lets the operator tilt the rear post away from the wheel during tyre changing. Automotive workshops get pedal-operated blast inflation, giving operators foot control of the inflation function at the tyre changer.

Full-automatic assistant arm device
Maximum wheel diameter: 1,180 mm
Air supply: 8–10 bar
Power supply: 240–415 V
Bead breaker protector has an anti-slip design

Source: listing by Classic Lift Australia on IndustrySearch · Updated 2 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Classic Lift Australia provide you with a quote