Clean Lube Solutions Inline Oil Heaters
Clean Lube Solutions - Inline Oil Heaters
Clean Lube Solutions’ mobile in-line heater units (also known as Circulation Heaters) are designed and manufactured to superior standards ensuring an efficient and easily regulated transfer or kidney looping of oils.
Description
Clean Lube Solutions’ trolley mounted in-line heaters are designed for use on mineral and synthetic oil systems where oils and fluids require heating to lessen viscosity, whilst maintaining a consistent flow rate. These heater units are low maintenance and easy to install ensuring an efficient and easily regulated transfer or kidney loop oil heating system.
Customised options are available to meet your application requirements.
Applications
Clean Lube Solutions 5kw to 25kw circulation (inline) heaters regulate and control fluid temperature and viscosity at a steady and measured flow rate in which the temperature is able to be modulated by the operator.
A smaller oil heater such as the 7kw system is typically used on small to medium systems up to 5,000 litres to assist with flushing, filtration or water removal devices.
The larger oil heater such as an 18kw system is used on turbine oil or large systems of 8,000 litres or more to assist with flushing, filtration or water removal devices.
Technical Specifications
- 7kW System
- Dimensions: 1100mmH X 350mmW
- Power: 7kw
- Wattage: 21watts/cm2
- Thermostat
- Ports: 2” BSP
- Weight: Approx. 40kgs
- Material: Stainless steel In-Line Heater Units
- 18kW System
- Dimensions: 1300mmH X 350mmW
- Power: 18kw
- Wattage: 21watts/cm2
- Thermostat
- Ports: 2” BSP
- Weight: Approx. 65kgs
- Material: Stainless steel
Features and Benefits
- Thermostatic control
- Over temperature cut-out
- Flashing light to indicate operation
- Low wattage heater element for heating of oil
- Mounted to custom trolley
- Wattage regulator to obtain desired temperature
To contact Clean Lube Solutions about Clean Lube Solutions Inline Oil Heaters use Get a quote.
Description
Clean Lube Solutions’ trolley mounted in-line heaters are designed for use on mineral and synthetic oil systems where oils and fluids require heating to lessen viscosity, whilst maintaining a consistent flow rate. These heater units are low maintenance and easy to install ensuring an efficient and easily regulated transfer or kidney loop oil heating system.
Customised options are available to meet your application requirements.
Applications
Clean Lube Solutions 5kw to 25kw circulation (inline) heaters regulate and control fluid temperature and viscosity at a steady and measured flow rate in which the temperature is able to be modulated by the operator.
A smaller oil heater such as the 7kw system is typically used on small to medium systems up to 5,000 litres to assist with flushing, filtration or water removal devices.
The larger oil heater such as an 18kw system is used on turbine oil or large systems of 8,000 litres or more to assist with flushing, filtration or water removal devices.
Technical Specifications
- 7kW System
- Dimensions: 1100mmH X 350mmW
- Power: 7kw
- Wattage: 21watts/cm2
- Thermostat
- Ports: 2” BSP
- Weight: Approx. 40kgs
- Material: Stainless steel In-Line Heater Units
- 18kW System
- Dimensions: 1300mmH X 350mmW
- Power: 18kw
- Wattage: 21watts/cm2
- Thermostat
- Ports: 2” BSP
- Weight: Approx. 65kgs
- Material: Stainless steel
Features and Benefits
- Thermostatic control
- Over temperature cut-out
- Flashing light to indicate operation
- Low wattage heater element for heating of oil
- Mounted to custom trolley
- Wattage regulator to obtain desired temperature
To contact Clean Lube Solutions about Clean Lube Solutions Inline Oil Heaters use Get a quote.
SML Oil Heater | STC-12
Oil Heaters | STM series
SHINI WATER / OIL HEATERS | STM
The Kroll Kozy - Fuel Heater
Water Bath Heaters
Hot Oil Heaters
Thermal Oil Heaters
LHE Oil Heater
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales