Kasuga Seiki - CNC Milling Machine | Q100

Product Specifications: 

• Table size: 1150 x 600 mm Maximum Load: 1000 kg T-Slot (Pitch x No. x W): 18 x 5 x 125 mm
• X Axis Travel: 1050 mm Y Axis Travel: 610 mm Z Axis Travel: 610 mm Spindle Taper: BT-40 Spindle bearing (ID): 70mm Spindle nose to table surface: 125 – 735 mm
• Spindle servo motor-cont./30 min.: Belt type spindle 11-15 kW Spindle speed 10000 rpm
• Spindle servo motor-cont./30 min.: Gear drive spindle 7.5/11kW Spindle speed 8000 rpm
• Spindle center to column guideway: 680 mm Table front edge to door: 310 mm Floor to table without leveling pads: 900 mm
• X/Y/Z Rapid feed rate: 24/24/20 m/min X/Y/Z Axis Cutting feed rate: 10 m/min X/Y/Z Axis Ballscrew: 40/40/40 mm Minimum setting: 0.001 mm
• X/Y/Z Axis feed motor (Fanuc): 3.0/3.0/7.0 kW ATC Arm type no. of tools: BT-40 / 24T Tool change time (tool to tool): 2.3 sec.
• Max tool diameter/length: 78/250 mm Max tool diameter w/o adjacent tool: 120 mm Max tool weight 8 kg Coolant tank volume: 200 L
• Lubrication tank volume: 4 L Power required: 30 KVA Pressurized air:5.5 – 7 kg/cm2 Machine dimension: 2950 x 2700 x 2950 mm
• Machine weight: 6500 kg Controller: Oi-MF / M80-4A / 828D

To contact Advanced Machine Tools about Kasuga Seiki CNC Milling Machine | Q100 use Get a quote.

Product Specifications: 

• Table size: 1150 x 600 mm Maximum Load: 1000 kg T-Slot (Pitch x No. x W): 18 x 5 x 125 mm
• X Axis Travel: 1050 mm Y Axis Travel: 610 mm Z Axis Travel: 610 mm Spindle Taper: BT-40 Spindle bearing (ID): 70mm Spindle nose to table surface: 125 – 735 mm
• Spindle servo motor-cont./30 min.: Belt type spindle 11-15 kW Spindle speed 10000 rpm
• Spindle servo motor-cont./30 min.: Gear drive spindle 7.5/11kW Spindle speed 8000 rpm
• Spindle center to column guideway: 680 mm Table front edge to door: 310 mm Floor to table without leveling pads: 900 mm
• X/Y/Z Rapid feed rate: 24/24/20 m/min X/Y/Z Axis Cutting feed rate: 10 m/min X/Y/Z Axis Ballscrew: 40/40/40 mm Minimum setting: 0.001 mm
• X/Y/Z Axis feed motor (Fanuc): 3.0/3.0/7.0 kW ATC Arm type no. of tools: BT-40 / 24T Tool change time (tool to tool): 2.3 sec.
• Max tool diameter/length: 78/250 mm Max tool diameter w/o adjacent tool: 120 mm Max tool weight 8 kg Coolant tank volume: 200 L
• Lubrication tank volume: 4 L Power required: 30 KVA Pressurized air:5.5 – 7 kg/cm2 Machine dimension: 2950 x 2700 x 2950 mm
• Machine weight: 6500 kg Controller: Oi-MF / M80-4A / 828D

Read less...

To contact Advanced Machine Tools about Kasuga Seiki CNC Milling Machine | Q100 use Get a quote.