Kasuga Seiki CNC Milling Machine | Q100

Kasuga Seiki - CNC Milling Machine | Q100

Supplier: Advanced Machine Tools

CNC Milling Machine | Q100

Kasuga Seiki is a well known manufacturer in Taiwan offering a wide range of CNC Machining Centres with a strong focus on high speed applications

In Stock

Product Specifications:

Table size: 1150 x 600 mm Maximum Load: 1000 kg T-Slot (Pitch x No. x W): 18 x 5 x 125 mm
X Axis Travel: 1050 mm Y Axis Travel: 610 mm Z Axis Travel: 610 mm Spindle Taper: BT-40 Spindle bearing (ID): 70mm Spindle nose to table surface: 125 – 735 mm
Spindle servo motor-cont./30 min.: Belt type spindle 11-15 kW Spindle speed 10000 rpm
Spindle servo motor-cont./30 min.: Gear drive spindle 7.5/11kW Spindle speed 8000 rpm
Spindle center to column guideway: 680 mm Table front edge to door: 310 mm Floor to table without leveling pads: 900 mm
X/Y/Z Rapid feed rate: 24/24/20 m/min X/Y/Z Axis Cutting feed rate: 10 m/min X/Y/Z Axis Ballscrew: 40/40/40 mm Minimum setting: 0.001 mm
X/Y/Z Axis feed motor (Fanuc): 3.0/3.0/7.0 kW ATC Arm type no. of tools: BT-40 / 24T Tool change time (tool to tool): 2.3 sec.
Max tool diameter/length: 78/250 mm Max tool diameter w/o adjacent tool: 120 mm Max tool weight 8 kg Coolant tank volume: 200 L
Lubrication tank volume: 4 L Power required: 30 KVA Pressurized air:5.5 – 7 kg/cm2 Machine dimension: 2950 x 2700 x 2950 mm
Machine weight: 6500 kg Controller: Oi-MF / M80-4A / 828D

To contact Advanced Machine Tools about Kasuga Seiki CNC Milling Machine | Q100 use Get a quote.

Product Specifications:

Table size: 1150 x 600 mm Maximum Load: 1000 kg T-Slot (Pitch x No. x W): 18 x 5 x 125 mm
X Axis Travel: 1050 mm Y Axis Travel: 610 mm Z Axis Travel: 610 mm Spindle Taper: BT-40 Spindle bearing (ID): 70mm Spindle nose to table surface: 125 – 735 mm
Spindle servo motor-cont./30 min.: Belt type spindle 11-15 kW Spindle speed 10000 rpm
Spindle servo motor-cont./30 min.: Gear drive spindle 7.5/11kW Spindle speed 8000 rpm
Spindle center to column guideway: 680 mm Table front edge to door: 310 mm Floor to table without leveling pads: 900 mm
X/Y/Z Rapid feed rate: 24/24/20 m/min X/Y/Z Axis Cutting feed rate: 10 m/min X/Y/Z Axis Ballscrew: 40/40/40 mm Minimum setting: 0.001 mm
X/Y/Z Axis feed motor (Fanuc): 3.0/3.0/7.0 kW ATC Arm type no. of tools: BT-40 / 24T Tool change time (tool to tool): 2.3 sec.
Max tool diameter/length: 78/250 mm Max tool diameter w/o adjacent tool: 120 mm Max tool weight 8 kg Coolant tank volume: 200 L
Lubrication tank volume: 4 L Power required: 30 KVA Pressurized air:5.5 – 7 kg/cm2 Machine dimension: 2950 x 2700 x 2950 mm
Machine weight: 6500 kg Controller: Oi-MF / M80-4A / 828D

Read less...

To contact Advanced Machine Tools about Kasuga Seiki CNC Milling Machine | Q100 use Get a quote.

AI Overview BETA

The Kasuga Seiki Q100 is a CNC milling machine that uses computer-controlled cutting tools to remove material from workpieces. Its arm-type tool changer completes tool-to-tool changes in 2.3 seconds, reducing the interval between machining steps. For high-speed machining applications, its belt-drive spindle runs at a faster speed than the gear-drive alternative, giving operators another machining setup.

Table size: 1,150 x 600 mm
Maximum table load: 1,000 kg
BT-40 spindle taper and 70 mm spindle-bearing ID
Arm-type ATC holds 24 tools
Machine weight: 6,500 kg

Source: listing by Advanced Machine Tools on IndustrySearch · Updated 1 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Advanced Machine Tools provide you with a quote