Compact Flame Controller | BFI Automation ...
Compact Flame Controller | BFI Automation CFC 1000
The compact flame controller CFC 1000 is intended for the monitoring of flames. Application areas include monitoring in large steam generators, single and multi burner installations.
For the flame radiation analysis, a well approved integral procedure in the respective spectrum is carried out with the compact flame controller. After a pre-amplification, the unwanted CW light component is withdrawn from the output signal of the wear-resistant detector.
The subsequent sensitiveness attitude allows an attenuation of the signal for adaptation to the combustion process. The post-connected band pass filter caused, that only the typical modulation of the flame radiation of the primary combustion zone is valued and so extraneous light signals by neighbour burners can be distinguished from the own flame. Further functional groups include signal conditioning and other for the so-called dynamic monitoring channel which checks the fail safe function of the device continuously. A component or component defect leads to an immediate disconnection of the flame relay, which one is available as a floating change-over contact for use with the burner management system. The switching condition is announced additionally by a yellow LED on the reverse side of the device behind the Perspex pane. For the optimal adjustment of the compact flame controller the flame strength can be read off directly on the device by means of a pulsating green LED. For the visualization or remote indication, a current output is available at 0 or 4-20 mA. The safety switch-off time, which is based on the used fuel, is factory-adjusted to 1 second.
- Flame scanner with integrated flame amplifier and flame relay.
- TÜV approved, DIN-DVGW, CSA and UL listed, SIL3 certified
- For intermitted, continuous operation
- Type UV, UV1: For natural gas-, oil- and dual fuel operation
- Type IR (VIS-IR): For oil flames on diffusion burners
- Type IR2 (IR): For selective monitoring of gas- and oil burners
- Type IR3 (IR): For different fuels, oil, waste gases, duct burners
- Dual-channel flame monitoring system
- Analogue output 0(4) – 20mA Intensity
- Possible flame evaluation by software CFC-COM
- Switch-on threshold and switch-off threshold adjustable by software CFC-COM
- gain factor adjustable by software CFC-COM
- Status indication of flame relay and intensity by LED
- Class of protection IP 65.
- ATEX Zone 2 as standard
- optionally ATEX Zone 1
Model available
- CFC1000UV or UV1: natural gas, oil and mixed fire
- CFC1000IR (VIS-IR): Oil and coal dust monitoring also mixed burners
- CFC1000IR2: Gas flame on surface burners and reheating
- CFC1000IR3: Selective monitoring of gas and oil burners
Application examples:
- Power Plants
- Gas turbines
- Sulfur recovery (Claus process)
- Surface burner
- rotary kilns
- fluidised bed combustion
- Furnaces
- High-pressure systems
- Waste incinerators
- grate firing
- Residue burns
- Low NOx applications
For more information on this Compact Flame Controller please call or use the IndustrySearch email enquiry for a direct reply.
To contact Flame Science International Pty Ltd about Compact Flame Controller | BFI Automation CFC 1000 use Get a quote.
For the flame radiation analysis, a well approved integral procedure in the respective spectrum is carried out with the compact flame controller. After a pre-amplification, the unwanted CW light component is withdrawn from the output signal of the wear-resistant detector.
The subsequent sensitiveness attitude allows an attenuation of the signal for adaptation to the combustion process. The post-connected band pass filter caused, that only the typical modulation of the flame radiation of the primary combustion zone is valued and so extraneous light signals by neighbour burners can be distinguished from the own flame. Further functional groups include signal conditioning and other for the so-called dynamic monitoring channel which checks the fail safe function of the device continuously. A component or component defect leads to an immediate disconnection of the flame relay, which one is available as a floating change-over contact for use with the burner management system. The switching condition is announced additionally by a yellow LED on the reverse side of the device behind the Perspex pane. For the optimal adjustment of the compact flame controller the flame strength can be read off directly on the device by means of a pulsating green LED. For the visualization or remote indication, a current output is available at 0 or 4-20 mA. The safety switch-off time, which is based on the used fuel, is factory-adjusted to 1 second.
- Flame scanner with integrated flame amplifier and flame relay.
- TÜV approved, DIN-DVGW, CSA and UL listed, SIL3 certified
- For intermitted, continuous operation
- Type UV, UV1: For natural gas-, oil- and dual fuel operation
- Type IR (VIS-IR): For oil flames on diffusion burners
- Type IR2 (IR): For selective monitoring of gas- and oil burners
- Type IR3 (IR): For different fuels, oil, waste gases, duct burners
- Dual-channel flame monitoring system
- Analogue output 0(4) – 20mA Intensity
- Possible flame evaluation by software CFC-COM
- Switch-on threshold and switch-off threshold adjustable by software CFC-COM
- gain factor adjustable by software CFC-COM
- Status indication of flame relay and intensity by LED
- Class of protection IP 65.
- ATEX Zone 2 as standard
- optionally ATEX Zone 1
Model available
- CFC1000UV or UV1: natural gas, oil and mixed fire
- CFC1000IR (VIS-IR): Oil and coal dust monitoring also mixed burners
- CFC1000IR2: Gas flame on surface burners and reheating
- CFC1000IR3: Selective monitoring of gas and oil burners
Application examples:
- Power Plants
- Gas turbines
- Sulfur recovery (Claus process)
- Surface burner
- rotary kilns
- fluidised bed combustion
- Furnaces
- High-pressure systems
- Waste incinerators
- grate firing
- Residue burns
- Low NOx applications
For more information on this Compact Flame Controller please call or use the IndustrySearch email enquiry for a direct reply.
To contact Flame Science International Pty Ltd about Compact Flame Controller | BFI Automation CFC 1000 use Get a quote.
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales