Current Industries Electrical Cabinets I ...

Current Industries - Electrical Cabinets I MK3/1 Distribution Pillar

Supplier: Current Industries

Electrical Cabinets I MK3/1 Distribution Pillar

Distribution pillars can be pre wired or empty.

16 Recent Views In Stock

Distribution pillars can be supplied with the following:

Circuit breakers or busbar, M.E.N and Earth bar, cover panels and labelled components.
In most cases pillars are ready for cable connection on line and load.

Specifications:

Options	Details
Capability:	Designed for 50mm – 240mm cable
Overall size:	1295mm x 570mm x 530mm
Weight:	38kg
Current:	A/C 50hz
Earthing:	Designed for direct earthing
Maximum voltage:	415/240Volt
Cover:	Green polyethylene lift off cover (860mm x 570mm x 530mm)
Ventilation:	Single vent on top of hood
Frame:	2mm hot dipped galvanised steel frame
Switch panel:	700mm x 480mm x 6mm
Lockable:	Suits power industry padlock (padlock not supplied)
Meets Australian Standards:	AS/NZS3439.1

To contact Current Industries about Current Industries Electrical Cabinets I MK3/1 Distribution Pillar use Get a quote.

Distribution pillars can be supplied with the following:

Circuit breakers or busbar, M.E.N and Earth bar, cover panels and labelled components.
In most cases pillars are ready for cable connection on line and load.

Specifications:

Options	Details
Capability:	Designed for 50mm – 240mm cable
Overall size:	1295mm x 570mm x 530mm
Weight:	38kg
Current:	A/C 50hz
Earthing:	Designed for direct earthing
Maximum voltage:	415/240Volt
Cover:	Green polyethylene lift off cover (860mm x 570mm x 530mm)
Ventilation:	Single vent on top of hood
Frame:	2mm hot dipped galvanised steel frame
Switch panel:	700mm x 480mm x 6mm
Lockable:	Suits power industry padlock (padlock not supplied)
Meets Australian Standards:	AS/NZS3439.1

Read less...

To contact Current Industries about Current Industries Electrical Cabinets I MK3/1 Distribution Pillar use Get a quote.

AI Overview BETA

The Current Industries MK3/1 Distribution Pillar is an electrical cabinet built for power distribution, supplied either empty or pre-wired for cable connections. In most cases, it arrives ready for cable connection on both the line side and the load side of the pillar. The green polyethylene cover lifts off to give access to the pillar interior.

Designed for 50 mm–240 mm cable
Maximum voltage: 415/240 Volt
Meets AS/NZS 3439.1
Overall size: 1295 mm x 570 mm x 530 mm
Weight: 38 kg

Source: listing by Current Industries on IndustrySearch · Updated 3 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Current Industries provide you with a quote