Fibersystem - Data Diode Rugged 100Mbit MM Tempest

Read more...

To contact Netopt about Fibersystem Data Diode Rugged 100Mbit MM Tempest use Get a quote.

Enables unidirectional transfer of data over Fiber cable between two networks with hardware separation to guarantee security. This completely eliminates the risk for data flow in false direction. (TEMPEST Level A/ EMSEC/ RÖS U1)

• One-way connection between two networks (also known as Simplex)
• Based on hardware, no extra software needed. This completely eliminates the risk for data flowing in false direction
• Fiberoptical links for galvanic seperation between networks
• Can be used in any ethernet application using fiber or copper connectivity
• All data will be transparently forwarded
• Ethernet based, UDP support (Syslog, NTP, SNMP traps)

Versions of Data Diodes Rugged

• 100Mbit or 1Gbit
• TEMPEST Level A/ EMSEC/ RÖS U1
• Other versions see seperate Datasheet Data Diodes 50-800 System

RUGGED FEATURES

• Low pressure
  Designed to operate in low pressure according to MIL-STD 810G test method 500.5 Procedure-I type B airtransport storage and for operation procedure –II type a)
• High temperature
  Designed to operate in high temperature according to MIL-STD 810G test method 501.5 Procedure -I (operation) level Hot dry +70°C and procedure-III (storage) Hot/dry (+71°C)
• Low temperature
  Designed to operate in low temperature according to MIL-STD 810G test method 502.5 Procedure -I (Storage) Cold (C2)-46°C and procedure -II(operation) Cold (C2)-40°C
• Rain
  Designed to operate in Rain according to MIL-STD 810G test method 506.5 Rain 506.4-I Outdoor, -II indoor with drop
• Humidity
  Designed to operate in Humidity according to MIL-STD 810G test method 507.4 procedure -I High RH (B2) 6 cycles
• Salt fog
  Designed to operate in Salt fog according to MIL-STD810G test method 509.5 with 5% concentration for 7 days
• Vibrations
  Designed to operate in Vibrations according to MIL-STD 810G test method 514.5 procedure-I and -II Operation category 14 and 20; transport category 4,5 and 10. (Shock 40g@11ms, Chock 75g@6ms)
• Shock
  Designed to operate in Shock according to MIL-STD 810G method 516.6 procedure -I (functional test for ground equipment) 3 shocks in each 6 directions
• Water protected
  Designed to be Water protected according to IPX5
• Dust protected
  Designed to be Dust protected according to IP4X
• EMC protected
  Designed to be EMC protected according to MIL-STD 461F method; RE102 level Navy Mobile & Army and CE102 level Basic curve
• EMI protected
  Designed to be EMI protected according to MIL-STD 461F method: RS103 level Army; CS101 level Curve#1; CS114 level Army; CS115 level Army and CS116 level Army

TECHNICAL DATA

Galvanic/Electrical link

• Data speed 100Mbit or 1Gbit depending on model

Fiber optic links

• Data speed 100Mbit or 1Gbit depending on model
• Wavelength 850nm. Optional 1310nm.
• Fiber optical connector LC
• Fiber Multi mode 50/125μm or 62.5/125μm
• Optical system budget 13dB in 62.5/125μm. 9dB in 50/125μm fiber
• Typical distance 0 – 2km (3dB system margin for 50/125μm and 6dB for 62.5/125μm)

Environmental

• Temperature range -40 to + 70°C

Power Supply

• DC 10-32VDC, Max 10W. (Optional 18-75VDC)
• DC-connector 3 pin

Power Consumtion

• 2,5W

Regulatory compliance

• Safety: CE
• Environmental: Complies with appropriate requirements of RoHs and WEEE

MIL Standard

• MIL-STD 810G, MIL-STD 461F (Only 60-00-7132, 60-00-7444, 60-00-7133)

RÖS U1/TEMPEST Level A

• Class SS1 (Only 60-00-7132, 60-00-7444, 60-00-7133)

Dimensions and Weight

• 44 (H), 110(W), 227(D)mm/ 1.7(H), 4.3(W), 8.9(D)inch 1 HU high and ¼ 19inch wide
• 1.4kg/ 3.09lbs

Read less...

To contact Netopt about Fibersystem Data Diode Rugged 100Mbit MM Tempest use Get a quote.