Fibersystem - Data Diode Rugged 100Mbit MM Tempest Get latest price

Data Diode Rugged 100Mbit MM Tempest

23 Recent Views In Stock

Enables unidirectional transfer of data over Fiber cable between two networks with hardware separation to guarantee security. This completely eliminates the risk for data flow in false direction. (TEMPEST Level A/ EMSEC/ RÖS U1)

• One-way connection between two networks (also known as Simplex)
• Based on hardware, no extra software needed. This completely eliminates the risk for data flowing in false direction
• Fiberoptical links for galvanic seperation between networks
• Can be used in any ethernet application using fiber or copper connectivity
• All data will be transparently forwarded
• Ethernet based, UDP support (Syslog, NTP, SNMP traps)

Versions of Data Diodes Rugged

• 100Mbit or 1Gbit
• TEMPEST Level A/ EMSEC/ RÖS U1
• Other versions see seperate Datasheet Data Diodes 50-800 System

RUGGED FEATURES

• Low pressure
  Designed to operate in low pressure according to MIL-STD 810G test method 500.5 Procedure-I type B airtransport storage and for operation procedure –II type a)
• High temperature
  Designed to operate in high temperature according to MIL-STD 810G test method 501.5 Procedure -I (operation) level Hot dry +70°C and procedure-III (storage) Hot/dry (+71°C)
• Low temperature
  Designed to operate in low temperature according to MIL-STD 810G test method 502.5 Procedure -I (Storage) Cold (C2)-46°C and procedure -II(operation) Cold (C2)-40°C
• Rain
  Designed to operate in Rain according to MIL-STD 810G test method 506.5 Rain 506.4-I Outdoor, -II indoor with drop
• Humidity
  Designed to operate in Humidity according to MIL-STD 810G test method 507.4 procedure -I High RH (B2) 6 cycles
• Salt fog
  Designed to operate in Salt fog according to MIL-STD810G test method 509.5 with 5% concentration for 7 days
• Vibrations
  Designed to operate in Vibrations according to MIL-STD 810G test method 514.5 procedure-I and -II Operation category 14 and 20; transport category 4,5 and 10. (Shock 40g@11ms, Chock 75g@6ms)
• Shock
  Designed to operate in Shock according to MIL-STD 810G method 516.6 procedure -I (functional test for ground equipment) 3 shocks in each 6 directions
• Water protected
  Designed to be Water protected according to IPX5
• Dust protected
  Designed to be Dust protected according to IP4X
• EMC protected
  Designed to be EMC protected according to MIL-STD 461F method; RE102 level Navy Mobile & Army and CE102 level Basic curve
• EMI protected
  Designed to be EMI protected according to MIL-STD 461F method: RS103 level Army; CS101 level Curve#1; CS114 level Army; CS115 level Army and CS116 level Army

 

TECHNICAL DATA

Galvanic/Electrical link

• Data speed 100Mbit or 1Gbit depending on model

Fiber optic links

• Data speed 100Mbit or 1Gbit depending on model
• Wavelength 850nm. Optional 1310nm.
• Fiber optical connector LC
• Fiber Multi mode 50/125μm or 62.5/125μm
• Optical system budget 13dB in 62.5/125μm. 9dB in 50/125μm fiber
• Typical distance 0 – 2km (3dB system margin for 50/125μm and 6dB for 62.5/125μm)

Environmental

• Temperature range -40 to + 70°C

Power Supply

• DC 10-32VDC, Max 10W. (Optional 18-75VDC)
• DC-connector 3 pin

Power Consumtion

• 2,5W

Regulatory compliance

• Safety: CE
• Environmental: Complies with appropriate requirements of RoHs and WEEE

MIL Standard

• MIL-STD 810G, MIL-STD 461F (Only 60-00-7132, 60-00-7444, 60-00-7133)

RÖS U1/TEMPEST Level A

• Class SS1 (Only 60-00-7132, 60-00-7444, 60-00-7133)

Dimensions and Weight

• 44 (H), 110(W), 227(D)mm/ 1.7(H), 4.3(W), 8.9(D)inch 1 HU high and ¼ 19inch wide
• 1.4kg/ 3.09lbs

 

Read more...

To contact Netopt about Fibersystem Data Diode Rugged 100Mbit MM Tempest use Get a quote.

Enables unidirectional transfer of data over Fiber cable between two networks with hardware separation to guarantee security. This completely eliminates the risk for data flow in false direction. (TEMPEST Level A/ EMSEC/ RÖS U1)

• One-way connection between two networks (also known as Simplex)
• Based on hardware, no extra software needed. This completely eliminates the risk for data flowing in false direction
• Fiberoptical links for galvanic seperation between networks
• Can be used in any ethernet application using fiber or copper connectivity
• All data will be transparently forwarded
• Ethernet based, UDP support (Syslog, NTP, SNMP traps)

Versions of Data Diodes Rugged

• 100Mbit or 1Gbit
• TEMPEST Level A/ EMSEC/ RÖS U1
• Other versions see seperate Datasheet Data Diodes 50-800 System

RUGGED FEATURES

• Low pressure
  Designed to operate in low pressure according to MIL-STD 810G test method 500.5 Procedure-I type B airtransport storage and for operation procedure –II type a)
• High temperature
  Designed to operate in high temperature according to MIL-STD 810G test method 501.5 Procedure -I (operation) level Hot dry +70°C and procedure-III (storage) Hot/dry (+71°C)
• Low temperature
  Designed to operate in low temperature according to MIL-STD 810G test method 502.5 Procedure -I (Storage) Cold (C2)-46°C and procedure -II(operation) Cold (C2)-40°C
• Rain
  Designed to operate in Rain according to MIL-STD 810G test method 506.5 Rain 506.4-I Outdoor, -II indoor with drop
• Humidity
  Designed to operate in Humidity according to MIL-STD 810G test method 507.4 procedure -I High RH (B2) 6 cycles
• Salt fog
  Designed to operate in Salt fog according to MIL-STD810G test method 509.5 with 5% concentration for 7 days
• Vibrations
  Designed to operate in Vibrations according to MIL-STD 810G test method 514.5 procedure-I and -II Operation category 14 and 20; transport category 4,5 and 10. (Shock 40g@11ms, Chock 75g@6ms)
• Shock
  Designed to operate in Shock according to MIL-STD 810G method 516.6 procedure -I (functional test for ground equipment) 3 shocks in each 6 directions
• Water protected
  Designed to be Water protected according to IPX5
• Dust protected
  Designed to be Dust protected according to IP4X
• EMC protected
  Designed to be EMC protected according to MIL-STD 461F method; RE102 level Navy Mobile & Army and CE102 level Basic curve
• EMI protected
  Designed to be EMI protected according to MIL-STD 461F method: RS103 level Army; CS101 level Curve#1; CS114 level Army; CS115 level Army and CS116 level Army

 

TECHNICAL DATA

Galvanic/Electrical link

• Data speed 100Mbit or 1Gbit depending on model

Fiber optic links

• Data speed 100Mbit or 1Gbit depending on model
• Wavelength 850nm. Optional 1310nm.
• Fiber optical connector LC
• Fiber Multi mode 50/125μm or 62.5/125μm
• Optical system budget 13dB in 62.5/125μm. 9dB in 50/125μm fiber
• Typical distance 0 – 2km (3dB system margin for 50/125μm and 6dB for 62.5/125μm)

Environmental

• Temperature range -40 to + 70°C

Power Supply

• DC 10-32VDC, Max 10W. (Optional 18-75VDC)
• DC-connector 3 pin

Power Consumtion

• 2,5W

Regulatory compliance

• Safety: CE
• Environmental: Complies with appropriate requirements of RoHs and WEEE

MIL Standard

• MIL-STD 810G, MIL-STD 461F (Only 60-00-7132, 60-00-7444, 60-00-7133)

RÖS U1/TEMPEST Level A

• Class SS1 (Only 60-00-7132, 60-00-7444, 60-00-7133)

Dimensions and Weight

• 44 (H), 110(W), 227(D)mm/ 1.7(H), 4.3(W), 8.9(D)inch 1 HU high and ¼ 19inch wide
• 1.4kg/ 3.09lbs

 

Read less...

To contact Netopt about Fibersystem Data Diode Rugged 100Mbit MM Tempest use Get a quote.