Dynapac Padfoot Roller - CA1300PD
Dynapac - Padfoot Roller - CA1300PD
Dynapac CA1300PDB soil compactors are vibratory rollers designed for compaction operations in pipe trenches, compacting roads, streets and parking lots.
Due to the small size and exceptional maneuverability, these rollers are also well suited for compaction on large building foundations and industrial construction sites and in cramped spaces in connection with refilling work. The rollers are also suitable for repair work and gives good maneuverability even on very steep slopes. All types of supporting and reinforcement courses can be compacted.
The Dynapac CA1300PD with blade is a vibratory roller designed for compaction operations in pipe trenches, on road shoulders and in cramped spaces in connection with refilling work. The roller is also suitable for repair work on dams, power stations, parking lots and airfields. The configuration of the machine includes pads, drum drive and strike-off blade. This machine is especially suitable for the compaction of silt and clayey soils.
The new CA rollers have static linear loads in steps of 5 kg/cm. This, combined with an optimum high amplitude, enables you to compact rockfill down to 1.65 meter with a Dynapac CA4000D. The better depth effect means higher volume capacity and less passes to reach compaction specifications, thus saving fuel and reducing cost. Environmental impact is also lower. If the roller is equipped with the Dynapac “Silent Weights” eccentric concept, this enhances compaction performance even further.
Standard Operating Weight CE: 5,000kg (incl. ROPS)
Maximum Operating Weight: 5,200kg
Engine Make & Model: Kubota V 3307 CR-TE4
Rated Power kW @ RPM: 55kW@2,200 rpm (75hp)
Drum Width: 1,370mm
To contact Construction Equipment Australia (CEA) about Dynapac Padfoot Roller - CA1300PD use Get a quote.
Due to the small size and exceptional maneuverability, these rollers are also well suited for compaction on large building foundations and industrial construction sites and in cramped spaces in connection with refilling work. The rollers are also suitable for repair work and gives good maneuverability even on very steep slopes. All types of supporting and reinforcement courses can be compacted.
The Dynapac CA1300PD with blade is a vibratory roller designed for compaction operations in pipe trenches, on road shoulders and in cramped spaces in connection with refilling work. The roller is also suitable for repair work on dams, power stations, parking lots and airfields. The configuration of the machine includes pads, drum drive and strike-off blade. This machine is especially suitable for the compaction of silt and clayey soils.
The new CA rollers have static linear loads in steps of 5 kg/cm. This, combined with an optimum high amplitude, enables you to compact rockfill down to 1.65 meter with a Dynapac CA4000D. The better depth effect means higher volume capacity and less passes to reach compaction specifications, thus saving fuel and reducing cost. Environmental impact is also lower. If the roller is equipped with the Dynapac “Silent Weights” eccentric concept, this enhances compaction performance even further.
Standard Operating Weight CE: 5,000kg (incl. ROPS)
Maximum Operating Weight: 5,200kg
Engine Make & Model: Kubota V 3307 CR-TE4
Rated Power kW @ RPM: 55kW@2,200 rpm (75hp)
Drum Width: 1,370mm
To contact Construction Equipment Australia (CEA) about Dynapac Padfoot Roller - CA1300PD use Get a quote.
The Dynapac CA1300PD is a vibratory padfoot roller for compacting soil in pipe trenches, road shoulders and confined refill areas. Its small size and manoeuvrability help crews work in tight spaces and on steep slopes. Repair work at dams, power stations, parking lots and airfields is another use, alongside compaction of supporting and reinforcement courses.
- Pads, drum drive and strike-off blade; suited to silt and clayey soils
- CE operating weight: 5,000 kg including ROPS; maximum operating weight: 5,200 kg
- Kubota V 3307 CR-TE4 engine
- Rated power: 55 kW at 2,200 rpm
- Drum width: 1,370 mm
Source: listing by Construction Equipment Australia (CEA) on IndustrySearch · Updated 3 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Construction Equipment Australia (CEA) on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
SY500H – 50.5t
SY365H – 36t Excavator
SY305LC Excavator
XAVS 450 Portable Air Compressor - 441CFM, 200psi
XAS 400 DD6 Portable Air Compressor – 410CFM, 102psi
X-Air 370 Portable Air Compressor
HiLight B7+ (Diesel) Lighting Tower
HiLight MI+6 (Hybrid) Lighting Tower
HiLight M7+ (Diesel) Lighting Tower
Utiliguard 2 Utility Locator
BOX Self Bunded Tank Range
X-Air 410 Portable Air Compressor
SCP40C Counterbalanced Electric Forklift
SCP80C6 Counterbalanced Electric Forklift
SCP50C6 Counterbalanced Electric Forklift
SCP25C Counterbalanced Electric Forklift
SCP20F Counterbalanced Electric Forklift
SMHW30G5 wheeled material handler
SCP30C Counterbalanced Electric Forklift
STH1840C-T3 Telehandler
Padfoot Roller - CA6500PD
Padfoot Roller / Compactor | 2012 815F 2
12T Bolt On Pad Foot Roller XS123PD
16T Pad Foot Roller XS165PD
8T Padfoot Roller XS83PD
Padfoot Roller | HC 70i P Compactor with Padfoot Drum
Multipak Roller (D01082)
Used Vibrating Padfoot Roller ARS200HX
Used Padfoot Roller / Compactor | 2007 AMMANN ASC200PD
Used Padfoot Roller 2012 BW213 PDH-4
Used Pad Foot Roller 13T ACS130 13T
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales