Eden Evaporative Coolers | ETLE

Eden - Evaporative Coolers | ETLE

Supplier: Kaldaz

Evaporative Coolers | ETLE

Evaporative Coolers | ETLE Blast Freezer

22 Recent Views In Stock

General Features

Coils are designed with the latest smart circuitry. It allows maximum massflow rate of refrigerant to be evenly distributed throughout the evaporator, maximising coil efficiency thus providing higher capacity with smaller physical unit dimension.
Casing comes in high quality powder coated Aluminum. Centre plates are built in to enhance air side performance and structural strength for models with 2 or more fans.
Defrosting is by electrical sheathed stainless steel heater elements fitted with moulded insulated connection and ultra low temperature silicone leads (rated to 80 deg) to ensure effective defrosting and durability. Water resulting from defrosting is channelled to the drain pan with a centrally positioned outlet for positive draining for all points.
Fins are produced from high grade Aluminum (Aluminum Association - AA 1100 Standard) with Double Sine Wave Pattern and Rippled Fin Edges to provide higher heat transfer efficiency.
Fan motors used in all the models are high quality brand German motors, fitted with thermistor motor protection and conform to DIN 40050 safety standards. Fan motors are of the highest quality offered in industry ensuring long life and durability for low temperature applications.
Capacity Ratings are thermally guaranteed by Eden and tested in accordance to ASHRAE dry box standards.
Quality Assurance all EDEN products are designed, manufactured and tested in our factories that are ISO 9001 certified.
One Year Warranty for all EDEN Heat Exchanger products. Terms and Conditions apply.

Options

Passivated Corrosion Protection for Aluminum Fins
Hot Gas Bypass Defrost
Stainless Steel Casing
Special Circuitry for Ultra Low Temperature (below SST -50 deg) or Overfeed Systems

Download attached brochure

To contact Kaldaz about Eden Evaporative Coolers | ETLE use Get a quote.

General Features

Coils are designed with the latest smart circuitry. It allows maximum massflow rate of refrigerant to be evenly distributed throughout the evaporator, maximising coil efficiency thus providing higher capacity with smaller physical unit dimension.
Casing comes in high quality powder coated Aluminum. Centre plates are built in to enhance air side performance and structural strength for models with 2 or more fans.
Defrosting is by electrical sheathed stainless steel heater elements fitted with moulded insulated connection and ultra low temperature silicone leads (rated to 80 deg) to ensure effective defrosting and durability. Water resulting from defrosting is channelled to the drain pan with a centrally positioned outlet for positive draining for all points.
Fins are produced from high grade Aluminum (Aluminum Association - AA 1100 Standard) with Double Sine Wave Pattern and Rippled Fin Edges to provide higher heat transfer efficiency.
Fan motors used in all the models are high quality brand German motors, fitted with thermistor motor protection and conform to DIN 40050 safety standards. Fan motors are of the highest quality offered in industry ensuring long life and durability for low temperature applications.
Capacity Ratings are thermally guaranteed by Eden and tested in accordance to ASHRAE dry box standards.
Quality Assurance all EDEN products are designed, manufactured and tested in our factories that are ISO 9001 certified.
One Year Warranty for all EDEN Heat Exchanger products. Terms and Conditions apply.

Options

Passivated Corrosion Protection for Aluminum Fins
Hot Gas Bypass Defrost
Stainless Steel Casing
Special Circuitry for Ultra Low Temperature (below SST -50 deg) or Overfeed Systems

Download attached brochure

Read less...

To contact Kaldaz about Eden Evaporative Coolers | ETLE use Get a quote.