Electric Tug

Electric Tug | Power Pusher

Supplier: UMS Australasia

Electric Tug | Power Pusher

1/6

Pedestrian operated electric tug

In Stock

The Power Pusher is a multipurpose pedestrian operated electric tug used to move, push, pull, steer and manoeuvre industrial loads that would have traditionally been moved by manual manpower or forklift!

Features

Classified as Pedestrian Electric Tugs and does not require the operator to be licensed
Comprehensive range of either standard or custom designed attachments available
Cost-effective alternative to a forklift truck
Fingertip controls for operator convenience & ease of use
Dramatically improve workplace safety
No harmful toxic emissions due to being battery powered
Much smaller than forklift trucks and therefore takes up less factory floor space

Typical Applications

Moving loads on Trolleys, Carts or mounted on industrial skates
Pushing / Pulling rolling stock or general loads on rail track
Pushing large Cable Drums and Paper Reels
Manoeuvres virtually any ‘wheeled’ load

Specifications

Motor: 400W or 550W, 24V DC with 125A programmable controller
Batteries: 2 x EM60AHr, sealed VRLA, Gel, IATA approved
Battery Charger: On-Board, IP68, multi-input voltage, 2 x 10A output
Wheels/Tyres: Foam-Filled, Puncture-Proof with free-wheel hubs, 14×5.5-6
Braking: Regenerative as standard

Other Features

Keyswitch off/on
Variable Throttle
Hand & Wheel Guards
Emergency Reverse Belly Button
Horn
Battery Gauge
Main Isolator Fuse
Emergency Stop

Options

Motion Bleeper, Strobe, Non-Marking Tyres, Stainless Steel, ATEX Zone 1

To contact UMS Australasia about Electric Tug | Power Pusher use Get a quote.

Features

Classified as Pedestrian Electric Tugs and does not require the operator to be licensed
Comprehensive range of either standard or custom designed attachments available
Cost-effective alternative to a forklift truck
Fingertip controls for operator convenience & ease of use
Dramatically improve workplace safety
No harmful toxic emissions due to being battery powered
Much smaller than forklift trucks and therefore takes up less factory floor space

Typical Applications

Moving loads on Trolleys, Carts or mounted on industrial skates
Pushing / Pulling rolling stock or general loads on rail track
Pushing large Cable Drums and Paper Reels
Manoeuvres virtually any ‘wheeled’ load

Specifications

Motor: 400W or 550W, 24V DC with 125A programmable controller
Batteries: 2 x EM60AHr, sealed VRLA, Gel, IATA approved
Battery Charger: On-Board, IP68, multi-input voltage, 2 x 10A output
Wheels/Tyres: Foam-Filled, Puncture-Proof with free-wheel hubs, 14×5.5-6
Braking: Regenerative as standard

Other Features

Keyswitch off/on
Variable Throttle
Hand & Wheel Guards
Emergency Reverse Belly Button
Horn
Battery Gauge
Main Isolator Fuse
Emergency Stop

Options

Motion Bleeper, Strobe, Non-Marking Tyres, Stainless Steel, ATEX Zone 1

Read less...

To contact UMS Australasia about Electric Tug | Power Pusher use Get a quote.

AI Overview BETA

The Power Pusher is a pedestrian-operated electric tug for moving, pushing, pulling, steering and manoeuvring industrial loads traditionally handled by manual manpower or forklifts. Its classification as a pedestrian electric tug means operators do not need a licence to use it. For factories, its smaller size than a forklift truck means it takes up less factory floor space.