EnPro PFIR Insertion Regulator
EnPro - PFIR Insertion Regulator
The EnPro PFIR is an insertion Probe Regulator that provides a regulated pressure sample supply to chromatograph's, H2S analysers, gravitometers, calorimeters, moisture analysers, instrument gas takeoffs, and other on line analysing equipment.
By taking the pressure drop at the tip of the probe, inside the pipe, the Joule-Thompson effect is minimised or eliminated. Thus a dry sample is generated, essential for on-line analysers. To assist the reduction of forces generating vortex shedding, the helical transition tube acts as an aerodynamic stabiliser.
Product Specifications:
- Pressure temperature rating: Std 1500 ANSI
- Outlet pressure: 20-18,000 kPa
- Connections: 1" NPT connection standard. ¾”and ½”available. Flanged connection available up to 900 ANSI in RF, RTJ, etc.; Screwed-on Carbon steel or Stainless steel; Integral.
- Insertion length: 75 mm standard with variable extensions available
- Construction & materials: 316 stainless steel, Viton
- elastomers (std) PTFE/PEEK seat lnlet filter 30 microns Bolted bonnet.
- Capacity: Cv: 0.06
- Options: Silconert treatment (inhibits sulphur and mercury ingression); Specialty tips for liquids and particulates (pre and post regulation); Heated version available
To contact Haldatec Pty Ltd about EnPro PFIR Insertion Regulator use Get a quote.
By taking the pressure drop at the tip of the probe, inside the pipe, the Joule-Thompson effect is minimised or eliminated. Thus a dry sample is generated, essential for on-line analysers. To assist the reduction of forces generating vortex shedding, the helical transition tube acts as an aerodynamic stabiliser.
Product Specifications:
- Pressure temperature rating: Std 1500 ANSI
- Outlet pressure: 20-18,000 kPa
- Connections: 1" NPT connection standard. ¾”and ½”available. Flanged connection available up to 900 ANSI in RF, RTJ, etc.; Screwed-on Carbon steel or Stainless steel; Integral.
- Insertion length: 75 mm standard with variable extensions available
- Construction & materials: 316 stainless steel, Viton
- elastomers (std) PTFE/PEEK seat lnlet filter 30 microns Bolted bonnet.
- Capacity: Cv: 0.06
- Options: Silconert treatment (inhibits sulphur and mercury ingression); Specialty tips for liquids and particulates (pre and post regulation); Heated version available
To contact Haldatec Pty Ltd about EnPro PFIR Insertion Regulator use Get a quote.
Low Flow Pressure Regulators | LF240
Medium Flow Pressure Regulators | MF400
High Flow Pressure Regulator | HF301
PFIR Insertion Regulator
Back Pressure Regulator | BIBS100
Subsea Pressure Regulator | SS691
Chemical Injection Pump | BIP
Floating Piston Sample Cylinder | SCP
Standard Sample Cylinder | ESSC
Chemical Injection System | Direct Injection Odouriser | ODI
Liquid or Gas Particulate Filter | FP-100
Temperature Probe | Thermowell
Oil Sample Collection Vessel | OCV
Hydrocarbon Liquid Sampling System
Gas Sampling System
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales