Evolution LX1 industrial inkjet printers are a simple and affordable alternative for applications requiring a simple but low-cost inkjet printing solution. LEXMARK thermal inkjet cartridges for superior performance
Using disposable LEXMARK cartridges means virtually no maintenance. Simple remove the spent cartridge and insert another cartridge in a matter of seconds.
Lexmark inkjet cartridgesNO valves NO filters NO flushing NO solvents or make-up solutions NO ink tubing NO printhead servicing/alignment NO nozzle replacements
The LX cartridge also offers better performance in some aspects over the Hewlett-Packard (HP) inkjet cartridges:
Lower Cost Up to 20% higher yield Increased print distance (up to 10mm)
The Evolution LX1 comes complete with a universal controller (for entering information), printhead (including inbuilt product detection) and mounting bracketry for installation onto packaging equipment. The printhead features solid construction using lightweight aluminium in a compact modullar design. The printhead houses the ink cartridge and is powered by 12 volts DC - so requires no electrician for installation (a low-voltage adapter is supplied with the printhead).A product detection sensor is inbuilt into the front of the printhead, and the rear ports of the printer allow for optional external sensors, speed encoders or communication networking.
The dovetail slots on either side of the printhead allow for EVOLUTION-LX printheads to be "stitched" together so that more information can be printed. The Evolution printheads are programmed by the universal controller.
ANY Evolution-LX or EVOLUTION-HP unit can be programmed using the Stylus Touchscreen Controller, used to access and control all the basic functions of the printhead including:
Changing the message Print direction Line speed Print delay Network Address & Printhead selection (for multiple networked printheads)
Only ONE controller is needed for multiple printheads, whether the printheads are networked together or as standalone modules. This is a great cost-saving factor, since customers can now add extra printers to achieve different tasks without needing to buy multiple complete systems - just "add-on" another printhead!
Bracketry for the EVOLUTION controller includes both height and product width adjustments. A special printhead protection is inbuilt into the printhead bracket to allow it to be pushed out of the way if a mis-aligned product passes.Installation simply involves drilling 2x holes with the aid of the drilling template label.
Thank you for your interest in our FLEXMARK Dot Peen marking systems. The FLEXMARK units are available in 2 different models. For small markings within a 60x30mm marking area, choose the Flexmark MINI which is a simple, lightweight handheld machine.
However, the most popular model is the Flexmark COMBO with a larger marking area of 60x120mm and offering 2-in-1 functionality - a bench stand for marking small parts or awkward parts that need a holding fixture but converts in seconds to a handheld operation for marking large parts that cannot fit on a bench. The needle will automatically absorb a round or uneven surface (making handmarking easier) and the impact force can be adjusted so thinner/softer items like aluminium nameplates don't get deformed, but you can also mark larger parts more deeply for extra durability if desired.
Trend Marking Systems | Product Marking Systems, Labeling Equipment
Trend Marking Systems Australia specialise in simple and low-cost product marking systems and labelling equipment. Whether you need direct product coding or if you need equipment to print or label ...