Flow High Pressure Pump for Waterjet ...

Flow - High Pressure Pump for Waterjet Cutters | 30SA

Supplier: Performatec

High Pressure Pump for Waterjet Cutters | 30SA

Powered by a Seimens 30HP IE2 high-efficiency electric motor, this pump will deliver a continuous output of 60,000psi of water at 2.3 litres per minute.

Year round low maintenance HP pump

In Stock

The Flow 30SA intensifier pump comes standard with a dual pressure function for cutting of brittle products including glass, fiberglass, and composite materials.

Standard with the famous Flow intensifier, the 30SA pump has a simplified electronic shift and modern ceramic piston plungers.

How the Intensifier Pump Works

The linear intensifier pump is the original (and most common) technology used in waterjet cutting. Intensifier pumps use the “intensification principle” to pressurize water.

The “intensification principle” (or ratio), uses the difference in biscuit/plunger area to intensify or increase the pressure. Hydraulic oil is pressurized and the low-pressure oil pushes against a biscuit, which has a face area 20 times greater than the face of the high-pressure plunger that pushes against the water. Therefore, the pressure is “intensified” twenty times.

E.g., 3,000 psi of oil pressure will generate 60,000 psi of water pressure due to the 20:1 ratio of biscuit area to plunger area.

Specifications:

Operating Pressure: 4150 Bar (60,000 psi)
Maximum Pressure: 4480 Bar (65,000psi)
Flow Rate: 2.3 Litres/minute
Max Orifice Size: 0.25 mm (0.010”)
Horsepower: 30 HP
Hydraulic Reserve Capacity: 170 Litres
Attenuator Volume: 2.02 Litre

To contact Performatec about Flow High Pressure Pump for Waterjet Cutters | 30SA use Get a quote.

The Flow 30SA intensifier pump comes standard with a dual pressure function for cutting of brittle products including glass, fiberglass, and composite materials.

Standard with the famous Flow intensifier, the 30SA pump has a simplified electronic shift and modern ceramic piston plungers.

How the Intensifier Pump Works

The linear intensifier pump is the original (and most common) technology used in waterjet cutting. Intensifier pumps use the “intensification principle” to pressurize water.

E.g., 3,000 psi of oil pressure will generate 60,000 psi of water pressure due to the 20:1 ratio of biscuit area to plunger area.

Specifications:

Operating Pressure: 4150 Bar (60,000 psi)
Maximum Pressure: 4480 Bar (65,000psi)
Flow Rate: 2.3 Litres/minute
Max Orifice Size: 0.25 mm (0.010”)
Horsepower: 30 HP
Hydraulic Reserve Capacity: 170 Litres
Attenuator Volume: 2.02 Litre

Read less...

To contact Performatec about Flow High Pressure Pump for Waterjet Cutters | 30SA use Get a quote.

AI Overview BETA

The Flow 30SA is an intensifier pump for waterjet cutters, delivering a continuous stream of water at 60,000 psi to cut materials. Its 20:1 intensification ratio uses pressurised hydraulic oil against a biscuit to drive the high-pressure plunger, raising water pressure for cutting. Shops cutting brittle glass, fibreglass and composite materials get its standard dual-pressure function for those products.

Maximum pressure: 65,000 psi (4,480 bar)
Flow rate: 2.3 litres per minute
Maximum orifice size: 0.25 mm (0.010 in)
30 HP Siemens IE2 electric motor
Hydraulic reserve capacity: 170 litres

Source: listing by Performatec on IndustrySearch · Updated 4 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Performatec provide you with a quote

Supplier

Supplier: Performatec

Distribution: Australia Wide

Location: Ingleburn, NSW

Customers: CSR, Dept. of Defence, SureWeld, Cooling Brothers, Garlock, Safemaster, Ennis-Flint

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Performatec are also proudly displaying these credentials:

Established:

2003

Employees:

6-20

Customers:

CSR, Dept. of Defence, SureWeld, Cooling Brothers, Garlock, Safemaster, Ennis-Flint

Distribution:

Australia Wide

Location:

Ingleburn , NSW

Joined:

Oct 2022