Flow Meter - Solids / Liquids level and position measurements
Acoustic Wave Technology
Solids / Liquids level and position measurements to 182m (597ft)
Principle of Operations
The SULTAN 234 emits a high powered acoustic wave transmit pulse which is reflected from the surface of the material being measured. The reflected signal is processed using specially developed software to enhance the correct signal and reject false or spurious echoes.
Due to the high powered emitted pulse, any losses have far less effect than would be experienced by traditional ultrasonic devices. More energy is transmitted hence more energy is returned. Advanced receiver circuitry is designed to identify and monitor low level return signals even when noise levels are high. The measured signal is temperature compensated to provide maximum accuracy to the outputs and display.
Primary Areas of Applications
- Waste water/water:
River level, wet wells, inlet screens, tanks, sumps, pump stations, water towers, dams, basin levels, chemical storage, etc.
Crushers, surge bins, ore passes, conveyor profile, blocked chute, stockpile, stackers, reclaimers, storage silos etc.
Food, Cement, Plastics, Grain, Chemicals, Paper, Irrigation, Quarries
The Sultan 234 is a non intrusive acoustic wave transmitter with flexibility, used for measuring level of liquids, slurries and solids.
- Non contact measurement
- High Power even with two wire loop supply
- Low cost per point
- Wide range of communications:
- Devicenet, Goshawk, HART, Modbus, Profibus (Fieldbus & Profibus PA pending)
- Pump Control
- x5 pumps
- Auto compensation for dust, steam and losses
- Protection class
- IP67, NEMA 4x
- (IP68 Transducer)
- Programmable fail safe mode
- High temp applications on request
- GSM/CMDA remote setup options/config
- Differential and average level control
- (2 transducers)