Fluid Bed Dryers & Coolers
Fluid Bed Dryers & Coolers
The effectiveness of a standard dryer is evidenced by the fact that it typically uses 30-40% less fuel than a rotary dryer.
In conjunction with Carrier, iBulk offers internationally renowned drying and cooling technology. Utilising fluidisation, a condition in which solid particles are placed in a state akin to that of a fluid, offers an effective and consistent drying and cooling environment is achieved. This in turn will result in a uniform end product.
The effectiveness of a standard dryer is evidenced by the fact that it typically uses 30-40% less fuel than a rotary dryer.
Advantages:
- Efficient heat transfer with low energy consumption.
- Product is continually mixed to promote uniformity
- Fragile products can be handled with negligible particle degradation.
- No moving parts in contact with the product. Maintenance and abrasive wear are minimised and equipment is easily cleaned.
- Product retention times and gas temperatures are easily adjusted to vary the finished product condition.
- Fluid beds can be multifunctional. Drying, cooling, classifying and calcining can be done in one unit.
- Lower fluidising velocities are required, making the system more energy efficient.
- Easy to clean and maintain.
- Recirculated gas and closed-loop systems available for improved efficiency or solvent recovery.
- Clean-in-place and fire suppression systems available where necessary.
- Carrier’s patented Delta-Phase® Drive option permits on-line adjustment of angle of vibration and precise retention time control.
- Sanitary construction available.
Applications & Industries
Vibrating Fluid Beds are mainly used in the following industries:
- Sand
- Coal
- Plastics
- Food
- Polymers
- Chemicals
- Minerals
The applications that this product is used in include:
- Drying
- Cooling
- Calcining and
- Sterilising
Installation
Fluid Bed Dryer / Cooler installations are infinitely variable and are tailored to meet your requirements.
In addition to a standard dryer / cooler the air can be recirculated to provide an additional energy saving of 10-15% a reduction of the amount of air exhausted to atmosphere by up to 50%.
Furthermore, the addition of a multi-point predictive control system can place controllability and customisation at your finger tips.
To contact iBulk about Fluid Bed Dryers & Coolers use Get a quote.
In conjunction with Carrier, iBulk offers internationally renowned drying and cooling technology. Utilising fluidisation, a condition in which solid particles are placed in a state akin to that of a fluid, offers an effective and consistent drying and cooling environment is achieved. This in turn will result in a uniform end product.
The effectiveness of a standard dryer is evidenced by the fact that it typically uses 30-40% less fuel than a rotary dryer.
Advantages:
- Efficient heat transfer with low energy consumption.
- Product is continually mixed to promote uniformity
- Fragile products can be handled with negligible particle degradation.
- No moving parts in contact with the product. Maintenance and abrasive wear are minimised and equipment is easily cleaned.
- Product retention times and gas temperatures are easily adjusted to vary the finished product condition.
- Fluid beds can be multifunctional. Drying, cooling, classifying and calcining can be done in one unit.
- Lower fluidising velocities are required, making the system more energy efficient.
- Easy to clean and maintain.
- Recirculated gas and closed-loop systems available for improved efficiency or solvent recovery.
- Clean-in-place and fire suppression systems available where necessary.
- Carrier’s patented Delta-Phase® Drive option permits on-line adjustment of angle of vibration and precise retention time control.
- Sanitary construction available.
Applications & Industries
Vibrating Fluid Beds are mainly used in the following industries:
- Sand
- Coal
- Plastics
- Food
- Polymers
- Chemicals
- Minerals
The applications that this product is used in include:
- Drying
- Cooling
- Calcining and
- Sterilising
Installation
Fluid Bed Dryer / Cooler installations are infinitely variable and are tailored to meet your requirements.
In addition to a standard dryer / cooler the air can be recirculated to provide an additional energy saving of 10-15% a reduction of the amount of air exhausted to atmosphere by up to 50%.
Furthermore, the addition of a multi-point predictive control system can place controllability and customisation at your finger tips.
To contact iBulk about Fluid Bed Dryers & Coolers use Get a quote.
iBulk supplies Carrier fluid bed dryers and coolers for drying and cooling solid particles; a standard dryer typically uses 30–40% less fuel than a rotary dryer. Carrier’s optional patented Delta-Phase Drive adjusts the vibration angle online, giving precise control over product retention time. Mineral processors can also use a single unit for calcining as an additional application.
- Handles fragile products with negligible particle degradation
- No moving parts contact product, minimising maintenance and abrasive wear
- Air recirculation: 10–15% additional energy saving; up to 50% less exhaust air
- Clean-in-place and fire suppression systems available where necessary
- Adjust gas temperatures to vary the finished product condition
Source: listing by iBulk on IndustrySearch · Updated 2 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by iBulk on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales