Hafco Turret Milling Machine | BM-53VE

Hafco - Turret Milling Machine | BM-53VE

Supplier: Integrated Industrial

Turret Milling Machine | BM-53VE

3 Axis digital readout fitted.

In Stock

Features of this product

5HP 415V motor with mechanical variable speed system
NT40 Spindle taper with a chrome & ground quill
Digital speed readout display for accurate cutter speed
Hardened & ground work table & slide-ways
Square construction slides for Y & Z-Axis to maximise rigidity
Powered elevating motor for Z-Axis
Meehanite casting for high strength & minimal deformation
Quality electrics & overload protection in an easy access enclosure
Horizontal travelling ram mounted on a rotating base allowing repositioning of spindle
The ram incorporates a tail lug (spigot) to accept a slotting attachment etc.
High / neutral and low gear selection lever to maximise torque
X & Y-Axis power-feed with adjustable micro switch feed stops
Micro switch on the manual knee handle for additional operator safety
Metric dial graduations @ 0.02mm for X , Y & Z-Axis
Automatic quill feed 0.04, 0.08, 0.15mm/rev
Automatic cut off depth stop on quill
Oil lubrication pump and reservoir
Slide-way covers Y & Z-Axis
Mill head tilts to ±45º forward and back
Mill head tilts to ±90º left and right
Manual quick action quill lever
Mechanical spindle brake
Tool box and manual

Specifications of this product

We have various models and specifications in our range. These details are for the Milling Machine | BM-53VE. Get in touch to let us know your requirements so we can quote you on a product that best suits your needs.

Digital Readout: 3-Axis Digital Readout
Type: Vertical
(mm) Table Size: 1370 x 254
Spindle Taper - Vertical: NT40
(mm) Longitudinal Travel (X-Axis): 910
(mm) Cross Travel (Y-Axis): 400
(mm) Vertical Travel (Z-Axis): 415
Type of Slides Dovetail: (X), Square (Y & Z)
(mm) Ram Travel: 555
(mm) Spindle to Table: 465
(mm) Spindle Travel / Diameter: 127 / 86
(mm) Throat Depth (max.): 635
Tilting Head (Left ~ Right): ±90º
Tilting Head (Forward ~ Back): ±45º
(mm/rev) Power Feed - Quill: 0.04 / 0.08 / 0.15
(mm/min) Power Feed - Longitudinal (X-Axis): 20 - 2000
(mm/min) Power Feed - Cross (Y-Axis): 20 - 2000
(mm/min) Power Feed - Vertical (Z-Axis): Rapid
(inch / mm) Table T-Slot Size: 16
(kg) Work Table Load Capacity: 350
(No./ rpm) Spindle Speeds Vertical Variable: (50 - 3550)
(kW / hp) Motor Power - Vertical: 3.75 / 5
(V / amp) Voltage / Amperage: 415
(cm) Shipping Dimensions (L x W x H): 163 x 134 x 225
(kg) Nett Weight: 1545

To contact Integrated Industrial about Hafco Turret Milling Machine | BM-53VE use Get a quote.

Features of this product

5HP 415V motor with mechanical variable speed system
NT40 Spindle taper with a chrome & ground quill
Digital speed readout display for accurate cutter speed
Hardened & ground work table & slide-ways
Square construction slides for Y & Z-Axis to maximise rigidity
Powered elevating motor for Z-Axis
Meehanite casting for high strength & minimal deformation
Quality electrics & overload protection in an easy access enclosure
Horizontal travelling ram mounted on a rotating base allowing repositioning of spindle
The ram incorporates a tail lug (spigot) to accept a slotting attachment etc.
High / neutral and low gear selection lever to maximise torque
X & Y-Axis power-feed with adjustable micro switch feed stops
Micro switch on the manual knee handle for additional operator safety
Metric dial graduations @ 0.02mm for X , Y & Z-Axis
Automatic quill feed 0.04, 0.08, 0.15mm/rev
Automatic cut off depth stop on quill
Oil lubrication pump and reservoir
Slide-way covers Y & Z-Axis
Mill head tilts to ±45º forward and back
Mill head tilts to ±90º left and right
Manual quick action quill lever
Mechanical spindle brake
Tool box and manual

Specifications of this product

Digital Readout: 3-Axis Digital Readout
Type: Vertical
(mm) Table Size: 1370 x 254
Spindle Taper - Vertical: NT40
(mm) Longitudinal Travel (X-Axis): 910
(mm) Cross Travel (Y-Axis): 400
(mm) Vertical Travel (Z-Axis): 415
Type of Slides Dovetail: (X), Square (Y & Z)
(mm) Ram Travel: 555
(mm) Spindle to Table: 465
(mm) Spindle Travel / Diameter: 127 / 86
(mm) Throat Depth (max.): 635
Tilting Head (Left ~ Right): ±90º
Tilting Head (Forward ~ Back): ±45º
(mm/rev) Power Feed - Quill: 0.04 / 0.08 / 0.15
(mm/min) Power Feed - Longitudinal (X-Axis): 20 - 2000
(mm/min) Power Feed - Cross (Y-Axis): 20 - 2000
(mm/min) Power Feed - Vertical (Z-Axis): Rapid
(inch / mm) Table T-Slot Size: 16
(kg) Work Table Load Capacity: 350
(No./ rpm) Spindle Speeds Vertical Variable: (50 - 3550)
(kW / hp) Motor Power - Vertical: 3.75 / 5
(V / amp) Voltage / Amperage: 415
(cm) Shipping Dimensions (L x W x H): 163 x 134 x 225
(kg) Nett Weight: 1545

Read less...

To contact Integrated Industrial about Hafco Turret Milling Machine | BM-53VE use Get a quote.

AI Overview BETA

The Hafco BM-53VE is a vertical turret milling machine for machining workpieces, and it includes a three-axis digital readout. Its digital speed readout displays cutter speed, supporting accurate speed setting during milling operations. For machining jobs needing varied tool angles, operators can tilt the head left, right, forward and back to set its working angle.